Portable Clamp-On Flowmeters The ideal solution for plant surveys!

Clamp-on ultrasonic flowmeters utilizeexternal transducers that can quickly and easily be installed on the outside of the pipe. They can also be easily moved from one job site to another. There is no need to cut the pipe or interrupt the flow. Siemens ultrasonic clamp-on battery powered portable flowmeters are available in two different versions:Astandard portable meter with acompact plastic IP40 (NEMA 1) enclosure intended for indoor use. It weighs only 3.4 kg (7.5 lbs), making itextremely easy to carry from onelocation to another.Awaterproof portable meter with anIP67 enclosure is ideal for outdooruse. It can be left in place withoutworrying about rain damage. The rugged, impact resistant plastic case enables it to withstand rough treat-ment that normally would damage most other meters. Portable meters operate on AC or DC power, and have an internal battery that provides 4 hours of operation. The internal battery can be recharged in 1.5 hours.Portable meters operate in eitherWideBeam Transit-Time mode or Doppler mode making them suitable for virtually any liquid, even those with high aeration or suspended solids. The FUP1010 is an ideal checkmeterfor verification of your mechanical meters, and / or measurement in locations that are not currently being metered. Utilizing the meter’s internal datalogger, process history can be recorded and stored or downloaded to aPC or laptop.
FUP1010 IP67 FUP1010 IP40 (NEMA 1) FUP1010 IP40 (NEMA 1)softcase Clamp-on ultrasonic portable meters feature: Easy installation; no need to cut pipe or stop flow Minimal maintenance No moving parts to wear or foul No pressure drop or energy loss Wide turn-down ratio Choice of single or dual channel models minimizes total cost Zeromatic Path automatically sets zero without stopping flow and reduces zero drift, even at low flow 5