GC315 - Controller for AMF Genset - 4 Pages

  1. P. 1

  2. P. 2

  3. P. 3

  4. P. 4

Catalogue excerpts

Automatic Mains Failure microprocessor based genset controller, perfect for all ATS+AMF genset applications Available in three versions: GC315 - GC315Plus - GC315Link Remote control systems True RMS readings on generator and mains voltages and currents. Neutral measure included. Active, Reactive and Apparent power measurement Frequency and power measurement on Mains input Engine speed measurement by frequency, pick-up or W 8+1+4 Inputs and 8 Outputs (6 programmable) Additional current measurement for neutral or ground fault protection (50N + 87N) Graphic display with self or manual adjustable contrast based on the temperature Insulated and Auto-supplied J1939 and MTU MDEC CAN interface RS232 serial port with MODBUS RTU protocol RS485 insulated serial port with MODBUS RTU protocol Ethernet interface with MODBUS TCP/IP protocol assured reliability GPRS Modem Possible connection to the software SI.MO.NE.  User friendly, intuitive and Real Time Clock with rechargeable battery Events and data logging Free SICES Supervisor  GC315Link Perfect for groups of RENTAL Gensets  GC315Plus Several communication tools  GC315 Price attractive controller

 Open the catalogue to page 1

Automatic Mains Failure microprocessor genset controller for managing the most common three-phases generator applications (Single Prime Mover and Single Stand-by gensets). GC315 is designed for electronic engines with CAN interface J1939 protocol (available in GC315Plus and GC315Link). These controllers can be used also for traditional engines with sensors (MPU). The adjustable parameters of the controller allow the use of this device for standard and customized tasks. Parameters are programmed using the free software tool (BoardPrg), which can be download thorough Sices web site. It’s even possible...

 Open the catalogue to page 2

Power direction (32P) Loss of excitation (Reverse reactive 32RQ) Time dependent overcurrent (51) Phase overcurrent with voltage restraint/control (51V) Instantaneous overcurrent (50, 50V) Phase sequence (47) Current and Voltage unbalance (46/47) Differential protection (50N) Ground fault protection (87N) Negative sequence (46-I2) Mains protections  Mains voltage Max./Min. (27/59)  Mains frequency Max./Min. (81U/81O)  Mains failure  N. 8+1 Programmable digital inputs (N.1 for the Emergency     stop push button) N. 3 Analogue inputs, if not used, can be used as not insulated digital inputs...

 Open the catalogue to page 3

Empowering your control Societa Italiana Costruzioni Elettriche Sumirago 21040 - Jerago con Orago (VA) ITALY SICES BRASIL Ltda Condommio Empresarial ONIX

 Open the catalogue to page 4

All S.I.C.E.S. catalogues and technical brochures

  1. DST4602 - DST4602

    20 Pages

    En
  2. MC100

    4 Pages

    En
  3. DITHERM

    7 Pages

    En