Catalogs >
SIAM RINGSPANN >
RIMOSTAT® Torque Limiters RSHD RINGSPANN

RIMOSTAT® Torque Limiters RSHD RINGSPANN
2Pages

Catalog excerpts

RIMOSTAT® Torque Limiters RSHD RINGSPANN - 1

RIMOSTAT®-Torque Limiters RSHD for heavy-duty applications Features • Better stability of slipping torque than Belleville spring torque limiters over duration of the operating period • Adjustment of slipping torque setting according to the number of active springs – not through modification of spring pressure • Superb wear-behaviour during high energy consumption • High temperature resistant The RIMOSTAT® Principle Built-in component (e. g. flange, pulley, chain wheel, etc.) (optional) Bearing bush Bx (optional) Friction pad wear indicator Friction pad Pressure ring Assembly group spring carrier The contact pressure on the friction surfaces is produced by long coil springs. Because of the RIMOSTAT® Torque Limiter’s linear, flat-angle characteristic of the pressure force, practically no reduction of the slipping torque occurs even when friction linings are subjected to wear. As the diagram 68-3 shows, compared with Belleville spring torque limiters, assuming a friction wear of Δf the reduction of the slipping torque ΔM is negligible. Function Slipping torque M • When the preset slipping torque has been reached the built-in component (e. g. v-belt pulley) slips. • During the slipping process, input and output rotate relative to each other and the preset slipping torque continues to be transmitted. • Inherent in the slipping process is a high energy consumption. • Re-engagement is not necessary. • No wear adjustment required due to coil springs. Preload travel of spring f Characteristic of contact pressure force with RIMOSTAT® torque limiters ΔM1 ΔM2 ΔM3 M1 M2 M3 Characteristic of contact pressure force with plate spring torque limiters ΔMI ΔMII

Open the catalog to page 1

RIMOSTAT® Torque Limiters RSHD RINGSPANN - 2

RIMOSTAT®-Torque Limiters RSHD for heavy-duty applications inactive coil spring inactive coil spring Size 250 active coil spring Size 205 Friction pad wear indicator Bearing bush Bx (optional) Friction pad wear indicator Built-in component e. g. V-belt pulley (optional) active coil spring Bearing bush Bx (optional) Built-in component e. g. V-belt pulley (optional) Technical Data and Dimensions Type RSHD 205 RSHD 250 RSHD 330 RSHD 400 RSHD 500 RSHD 600 1) The max. speed relates to the dimensional stability of the Torque Limiter. • 2) Further bores as well as internal spline available on...

Open the catalog to page 2

RIMOSTAT® Torque Limiters RSHD RINGSPANN 2Pages

Catalog excerpts

All SIAM RINGSPANN catalogs and technical brochures

RIMOSTAT® Torque Limiters RSHD RINGSPANN
2Pages