VTdrive TS-I Electrical-Hydraulic Synchronous Servo Drive for Injection Molding Machine Manual
81Pages

TS-I Electrical-Hydraulic Synchronous Servo Drive for Injection Molding Machine

Foreword TS−I series synchronous servo drive is a high performance and highly reliable servo drive with high responding speed for electrolytic mixing system of the injection molding machine. The product is based on a flexible digital control module that uses high performance DSP, which realizes high performance vector control, precision position and speed control, non-linear weak magnetic high speed control and position calibration space vector low speed control for each kind of control algorithm and software for servo motors. In the meantime, in order to meet the high speed and high...

High Reliability Design □ Meeting the Relevant International Product Standards IEC61800−2 IEC61800−3 IEC61000−6 IEC61800−5−1 UL508C General requirements–Rating specifications for low voltage adjustable frequency a.c. power drive systems EMC product standard including specific test methods Electromagnetic compatibilityEMC–Part6:Generic standards Safety requirements –Electrical, thermal and energy UL Standard for Safety for Power Conversion Equipment Unified design of hardware interfaces: Unified design of control board, button/shuttle type operation panel facilitates the operation and...

Independent power supply for control: The drive provides an independent DC input interface. External UPS power supply can be connected to the drive through an option card. It is applicable to the applications of oilfield, chemical industry and printing and dyeing industry. Power-up self-detection function: It realizes the power-up detection on the peripheral circuit, such as motor grounding, disconnection, greatly improving the system reliability. Comprehensive system protection function: software/hardware current limiting protection, overcurrent and overvoltage protection, grounding short...

Customized Functions □ Multiple Function Code Display Modes X bASE: Basic menu mode, displays all the function codes. FASt : Fast menu mode,display the common parameters to be used in the commissioningis especially suitable for the naive users. ndFt: Non-factory setting menu mode, it only displays the function codes different from the leave-factory values to facilitate the inquiry and commissioning. LASt: Last change menu mode, it displays the 10 functions codes that are recently changed and P0.02 to facilitate the inquiry and commissioning. User can define the function codes for inquiry...

Safety Precautions Description of safety marks: Danger: The misuse may cause fire, severe injury, even death. Note: The misuse may cause medium or minor injury and equipment damage. This series synchronous servo drive is used to control the 3-phase (single phase) permanent magnetic synchronous motor (PMSM), cannot be used for single-phase motor or other applications. Otherwise, drive failure or fire may happen. This series of drive cannot be simply used in the applications directly related to the human safety, such as the medical equipment. This series of drive is produced under strict...

Wiring Danger The wiring must be conducted by qualified electricians. Otherwise, electric shock may happen or drive damage. Before wiring, confirm that the power supply is disconnected. Otherwise, electric shock may happen or fire. The PE terminal must be reliably grounded, and should use the third grounding method for grounding the PMSM motor at equal voltage potential, otherwise, the drive enclosure may become live. Please do not touch the main circuit terminals. The wires of the main circuit terminals must not contact the drive enclosure. Otherwise, electric shock may happen. The...

Operation Danger Power supply can only be connected after the wiring is completed and the cover is installed. It is forbidden to remove the cover in live condition; otherwise, electric shock may happen. When auto failure reset function or restart function is enabled, isolation measures shall be taken for the mechanical equipment, otherwise, personal injury may be caused. When the drive is powered on, its terminals are still live even when it is in stop state. Do not touch the drive terminals; otherwise electric shock may happen. The failure and alarm signal can only be reset after the...

The circuit boards have large scale CMOS IC. Please do not touch the board to avoid the circuit board damage caused by ESD. Others Danger It is forbidden to modify the drive unauthorizedly; otherwise, human injury may be caused. Confirm the following when the goods arrives: Confirm the following when the goods arrive: Items to be confirmed Whether the goods are the drive you ordered? Check if the information in the nameplate is same with that in the order? Whether there is any damage? Check if the package and the unit are damaged in transportation? Whether the fasteners become loosened? If...

TS-I Electrical-Hydraulic Synchronous Servo Drive for Injection Molding Machine User Manual Chapter 1 TS-I series Servo Drive Introduction 1.1 Product Model Description The digits and letters in the drive model field on the nameplate indicate such information as the drive series, power supply class, power class and software/hardware versions. 1.2 Product Nameplate Description Product model Input specification Output specification Product barcode

TS-I Electrical-Hydraulic Synchronous Servo Drive for Injection Molding Machine User Manual 1.3 A series of models and technical parameters of product Three-phase 400V Constant torque/heavy-duty application servo drive The power supply capacity KVA 5.77 Three-phase AC380V 50Hz/60Hz Allowable voltage range 323V528V Allow the frequency fluctuation ±5% minutes (inverse time Overload capacity TS−I−4T176A and above products are equipped with external DC reactor as standard. Note: the special requirements of the occasion of some peripheral environment and the machine, should increase the level of...

TS-I Electrical-Hydraulic Synchronous Servo Drive for Injection Molding Machine User Manual 1.4 Product Component Name Dust guard Dust guard Upper cover Mounting hole Mounting hole Mounting hole Heatsink Operation panel Operation panel Nameplate Cover Cover Lower cover Nameplate Nameplate Leading board TS−I−4T017A and below power class TS−I−4T024A and above power class Figure 1−1 Product component name 1.5 Product Outline, Mounting Dimension, and Weight TS−I−4T017A and below power class TS−I−4T024A and above power class Figure 1−2 Product outline and mounting dimension