(Shaw Dewpoint Transmitter) - Shaw Moisture Meters - #1

Text version of the page

Model SDT Dewpoint Transmitter Gujk Model SDT - Dewpoint TransmitterFeatures:- • 2 Wire, 24 V, 4-20 mA Dewpoint Transmitter • Various Ranges: Overall Range -100 ºC to +20 ºC (-148 ºF to +68 ºF) Dewpoint • Output configurable in °C Dewpoint, °F Dewpoint, ppm(v), g/m3 and lbs/MMSCF • Accuracy ± 2ºC (±3.6 ºF) Dewpoint • Weatherproof Rating IP66 – NEMA4X • Maximum Cable Length 1000m (3280 ft) • Open/Short Circuit Detection • Linear 4-20 mA output signal • Self contained, robust and reliable • Weighs only 175 g (0.385 lbs) • Supplied with Calibration Certificate Traceable to National & International Humidity Standards The Shaw Moisture Meters Model SDT is a compact, 2 wire, 4-20 mA dewpoint transmitter designed to meet the stringent demands of industrial applications. The unit is fully self-contained within a robust housing providing weatherproof protection to IP66 / NEMA4X. Utilising the Ultra High Capacitance Shaw Moisture Sensor, various dewpoint ranges are available covering an overall range from -100 ºC to +20 ºC (-148 ºF to +68 ºF) Dewpoint. The 4-20 mA output is configurable in °C Dewpoint, °F Dewpoint, ppm(v), g/m3 and lbs/MMSCF. Incorporating advanced electronics, the Model SDT derives its power from 7-28 Vdc non-isolated power source and is configured to output a linear, isolated, 4-20 mA signal for distances up to 1000 meters (3280 ft). Weighing in at only 175 g (0.385 lbs), the Model SDT is light enough to be supported by its’ connection direct into the pipeline or can be placed in a dedicated sample cell. The Model SDT is supplied ready to use, with a calibration certificate traceable to National & International humidity standards, Instruction Manual and 2 meters (6.56 ft) of cable. SDT_Specification_0907