Catalogs >
Shanghai Zhongji Machinery Co.ltd >
Zhongji EPS Automatic Vacuum Block Molding Machines With CE

Zhongji EPS Automatic Vacuum Block Molding Machines With CE
1Pages

Catalog excerpts

Zhongji EPS Automatic Vacuum Block Molding Machines With CE - 1

Jinx #iP« ffii^x frJEiJEtfjWfi Main Features l.With the use of PLC Controller (Programmable Logic Controller) and Touch Screen, the automatic looping process of opening and closing of the moulds, feeding, heating, heat preservation, cooling, mould ejection, and releasing the final product from the machine will be accomplished; 2. The Automatic Vacuum Control System does the feeding, heating, heat 3. The Vacuum System consists of the Vacuum Storage Tank, Vacuum cooling Tank, and highly efficient water-recycling vacuum pump; 4. The machine is coupled by using high quality welding method, and goes through aging treatment, which gives the machine high strength, and without deformation. The density of the EPS Block can reach 6~40kg/m3, with fast EPS Block forming speed, uniform bonding, low moisture content, and with very minor deformation; 5. Applying a special Teflon coating to the surface of the mould cavity (Optional) makes the EPS Block to be easily ejected or released out of the 6. The thickened wall Vacuum EPS Block Forming Machine has Automatic Conveyer, Automatic Electronic Weighing Scale, and the Automatic 7. This machine can be used to produce the width of 850mm, 950mm and 1150mm EPS Blocks, and also produce the width of 1000mm EPS Block EPS Automatic Vacuum Block Molding Machines The mould sizes mentioned in the above table are our standard mould sizes. But customers can also provide their own different mould sizes.

Open the catalog to page 1