LEEG SMP131-TLN waterproof pressure transmitter catalogue
5Pages

{{requestButtons}}

Catalog excerpts

LEEG SMP131-TLN waterproof pressure transmitter catalogue - 1

SMP131-TLN waterproof pressure transmitter Product information Pressure measuring, level measuring Reference accuracy Linearity out Standard Linearity hysteresis and repeatability ±0.2%F.S.,±0.5%F.S. Temperature effects (Calibration temperature:20±5℃) -40~85℃ ±0.1%F.S./10℃ Response time ≤5mS Stability Durability Brief Introduction 6 For all range, >10 pressure cycling Based on Piezoresistive silicon sensor technologies, combined with a variety of electrical and mechanical connections, the industrial transmitters are suitable for almost all industrial application. Signal output and maximum load RA Gauge pressure, Absolute Pressure Measuring range Absolute pressure 0-100MPa Accuracy

Open the catalog to page 1
LEEG SMP131-TLN waterproof pressure transmitter catalogue - 2

SMP131-TLN waterproof pressure transmitter Environmental condition Sensor type Operating conditions Code Type Working temperature range -40-85℃ Storage temperature Absolute Pressure Contact media temperature Sensor is sealed by FKM,0-80℃ range Sensor is welding seal,-30-80℃,free of ice for vacuum, pressure less than 20kpa Working humidity Protection class Seal type O-ring, FKM fully welded seal by stainless steel O-ring, Neoprene Dangerous situation pressure Gauge Power supply Item Nominal range power range Nominal range 7kpa, minimum range 5kPa Nominal range 35kpa, minimum range 10kPa...

Open the catalog to page 2
LEEG SMP131-TLN waterproof pressure transmitter catalogue - 3

SMP131-TLN waterproof pressure transmitter Electric connection Dimensional drawing(mm) Directly cable connection IP68 Process connection M20X1.5mm male, Φ3mm air hole, standard: GB/T193-2003, ISO261 G1/4 male, Φ3mm air hole, standard: GB/T7307, ISO228, DIN16288, BS2779, refer to DIN3852-E for welded part, (full welded on back part) G1/2-14NPT male, Φ3mm air hole, standard: GB/T12716, ANSI/ASME B1.20.1 G1/4-18NPT male, Φ3mm air hole, standard: GB/T12716, ANSI/ASME B1.20.1

Open the catalog to page 3
LEEG SMP131-TLN waterproof pressure transmitter catalogue - 4

SMP131-TLN waterproof pressure transmitter Dimensional drawing of process connection

Open the catalog to page 4
LEEG SMP131-TLN waterproof pressure transmitter catalogue - 5

SMP131-TLN waterproof pressure transmitter Selection table Waterproof pressure transmitter gauge pressure absolute pressure Vacuum pressure, less than 20kPa full sealed by stainless steel O-ring, Neoprene Specifications Pressure type Seal ways Electric connection Cable length The first two are figures, the third is index (unit:mm) Output ways 4-20mA with hart, two wire, power supply 16.5-55VDC 1-5VDC three wire, power supply 6-15VDC/10-30VDC 0-5VDC three wire, power supply 6-15VDC/10-30VDC 0-10VDC three wire, power supply 12-30VDC 4-20mA two wire, Intrinsic safety, power supply 10-28VDC...

Open the catalog to page 5

All Shanghai LEEG Instruments Co. catalogs and technical brochures

Archived catalogs