Catalogue - Self Tapping Threaded Inserts - Shanghai Jingyang - (Version JPG)

Untitled

Threaded insert self-tapping metric inner thread JY-202

Application

The threaded insert with cutting Slot is a self-tapping fastener for the création of wear-free, vibration résistant screw joints with high loading capacity in materials with low shearing strength.

It is suitable for installation in the following materials:

Light alloys; Cast iron, brass, bronze, NF metals; Plastics, laminâtes; Hardwoods

Dimensions in mm


Article No.	Internai Thread	External Thread		Length	Mini bore hole depth for blind holes	Retaining hole diameter L
	A	E	P	B	T	Métal	Plastic
JY-202-G02- —	M2	4.5	0.5	6	8	$4.2-4.3	$4.1-4.2
JY-202-G25- —	M2.5	4.5	0.5	6	8	$4.2-4.3	4> 4.1-4.2
JY-202-G03- —	M3	5	0.5	6	8	$4.7-4.8	4> 4.6-4.7
JY-202-G35- —	M3.5	6	0.75	8	10	$ 5.6-5.7	$5.5-5.6
JY-202-G04-—	M4	6.5	0.75	8	10	$ 6.1-6.2	$ 6.0-6.1
JY-202-G05--	M5	8	1	10	13	$7.5-7.6	$7.3-7.5
JY-202-G60-—	M6(a)	9	1	12	15	$8.5-8.6	$ 8.3-8.5
JY-202-G61--	M6	10	1.5	14	17	$9.2-9.4	$ 8.9-9.2
JY-202-G08--	M8	12	1.5	15	18	$ 11.2-11.4	$ 10.9-11.2
JY-202-G10--	M 10	14	1.5	18	22	* 13.2-13.4	$ 12.9-13.2
JY-202-G12--	M12	16	1.5	22	26	$ 15.2-15.4	$ 14.9-15.2
JY-202-G14--	M 14	18	1.5	24	28	$ 17.2-17.4	$ 16.9-17.2
JY-202-G16--	M16	20	1.5	22	27	$ 19.2-19.4	$ 18.9-19.2
JY-202-G18--	M18	22	1.5	24	29	$ 21.2-21.4	$ 20.9-21.2
JY-202-G20--	M20	26	1.5	27	32	4>25.2-25.4	$ 24.9-25.2
JY-202-G22--	M22	26	1.5	30	36	4>25.2-25.4	$ 24.9-25.2
JY-202-G24-—	M24	30	1.5	30	36	4> 29.2-29.4	$ 28.9-29.2
JY-202-G27--	M27	34	1.5	30	36	4> 33.2-33.4	$ 32.9-33.2
JY-202-G30--	M30	36	1.5	40	46	4>35.2-35.4	$ 34.9-35.2

1^A

Example for finding self-tapping threaded insert JY-202 with internai thread A=M5

The article number made of steel, hardened, zinc-plated and yellow chromated : JY-202-G05-020

Materials Unhardenedsteel Articleno......010

Case-hardened steel, zinc-plated, yellow chromated Article no......020

Brass Articleno......030

Rust-proof steel 1.4105 Articleno......040

Rust-proof steel 1.4305 Articleno......050

Other materials ,designs and finishes on request. Tolérances: ISO 2768-m

Thread: Internai thread A: as per ISO 6H ; External thread E: metric, Tolérances in accordance with works standard

For détails ofbore diameter guideline values, see the table on référence

Edge distance W: Lightalloy:>=0.2-0.6E Castiron:>=0.3 0.5E Plastics:>=0.25- 0.9E

Please note M2/M2.5 are only suitable for low-strength materials, as the shear résistance ofstuds

in the driving tools may be insufficient.

Self Tapping Threaded Inserts - Shanghai Jingyang - #4

Insert, Standoff, Fastener, Threaded insert, Threaded stud