Setrab

You need an aluminium cooler!Exactly dimensioned to suit your cooling needs and measurements!Then collaboration with Setrab is the best solution for you! Is the cooler to determine the system... Flexible manufacturing technique Background facts on aluminium coolers. Setrab has developed a very flexible manufacturing technique. We can therefore manufacture specially designed coolers even in very small series without spending large sums on tooling. In addition we already have a number of different cooler types, of which each one can be manufactured in a large number of varieties. By being attentive to our customers´ signals regarding changing needs, and thanks to our ability to adapt our organisation and products according to these signals, we want to be one step ahead in the development of a custom-made oil cooler manufacturer. • Coolers are normally produced by large subcontractors.• Most coolers are used in the automotive industry. • Coolers are often produced in standard sizes. Subcontractors are geared to volumes, which means that companys needing small or medium-sized series have difficulties in getting what they want. ...or is the system to determine the cooler? Setrab has a highly developed calculation technique, and produces mainly small and medium-sized series. The best results are achieved if we are involved at an early stage. With data on temperatures, flow rates, and pressure, we calculate the cooler requirements. We consider factors such as application area, cooling media, external dimensions, place- ment of connections, fastening points, mechanical loads, etc. Then we decide which one of our basic cooler models to start from. Setrab AB Setrab has been active on the world market since the end of the 1970s and is well established in many lines of business. Through close collaboration with our customers, we want to create long term relationships. Setrab headoffice and production facilities are in Malmö, Sweden, and our fully owned subsidaries are in the United Kingdom, Germany and the USA. Setrab is represented in more than 20 countries by importers and agents. Setrab's coolers become one with the system The cooler is designed to be a qualified and integrated component of the system in which it is to operate. The costs of adjusting the machine or installation to the cooler is reduced and our collaboration makes the cooler fit and perform as an optimal part together with the other equipment. As our coolers are cost-effective and have a high performance per surface unit, they sometimes become the decisive component, giving the competitive edge with respect to performance and design.