STD Oil Cooler

Long and secure functioning Modular construction hoses should be free from stress so as notto induce any tension to the coolerconnections. We also recommend the useof damping devices to isolate the coolerfrom vibrations whilst providing for ex-pansion of the cooler when at full opera-ting temperatures. Setrab STD Industrial oil coolers are used inapplications with low to medium-pressuresystems or in circulation systems wherethe oil cooler is an important componentfor achieving long and secure functioning.For example, in hydraulic systems, engines,transmissions, transformers, fuel coolers,etc. Our unique modular system for the STDOil Cooler gives us great freedom to adaptour coolers to most applications as regardsexternal dimensions. The range comprisesabout 700 dimensions, besides which wecan choose from among several differentair fins, turbulators, mounting flanges,placements of connections, and about 60different kinds of connections. Technical specifications •Maximum working pressure is 10 bar.Approved testing at a dynamic workingpressure of 0–10 bar, 200,000 pulsationin load, 2 Hz.•Corrosion protection: Nocolok brazingprocess and epoxy-coating.•Connections: BSP (G), Metric (M), JIC(AN).
Installation All types of installations should be assesed for the best method of mounting the oilcooler. When designing the mounting arr-angement consideration should be givento avoid any undue stresses and vibrationsbeing transmitted to the STD cooler. Hydra-lic hoses should be used to connect boththe inlet and outlet of the cooler and
Series123456789 405210D The composite range of STD Oil Coolers is available in 700 dimensions. Air fins are available in louvred and non-louvred options. The choice is decided by theactual operating conditions and working environment. The turbulator, which controls the oil flow sothat the maximum heat transfer is obtained,is designed for low oil pressure drop without the formation of a heat-insulating boundarylayer in the oil tube. In the standard version, the STD cooler is sup-plied with mounting brackets at each corner.If necessary, it can be manufactured withoutone or more of the brackets. 2