Heavy duty and flexible in size Withstands high pressures
Wave-shaped air fin for dirtyenvironment The Setrab COM Oil Cooler is used in mobileand stationary applications where there isdemanding pressure and vibrations. It canalso be used in low-pressure systems re-quiring an exact fit of the cooler into the
application. A special characteristic of the Setrab COM
Cooler is its high resistance to pressure. Theentire design is made to cope with high oilpressure, thanks in part to the sturdyextruded aluminium side tanks. The Nocolok
brazing also contributes to the high pressureresistance. In most cases, louvred air fins are preferred,as they provide better heat transfer thantheir non-louvred equivalents. However,
louvred air fins should not be used in dust-laden environment, as they can easily becomeblocked and cause the cooler to suffer a lossin cooling efficiency. Our new type F fin is
non-louvered and wave shaped, therebyimproving the heat transfer of the coolerwhilst minimising the chance of blockagedue to build-up of dirt and debris.
Technical specifications
•Maximum static pressure is 25 bar.Approved testing at a dynamic workingpressure of 0–16 bar, minimum 1,000,000pulsations in load, 2 Hz.•Corrosion protection: Nocolok brazingprocess and epoxy-coating.•Connections: BSP (G), Metric (M), JIC(AN).
Fully optional dimensions
The COM Cooler is one of the most adaptablecoolers on the market. It can be customizedprecisely for each application as regardscooling effect, dimension, connections andattachment.
COM Coolers withstand high pressure, thanksto the sturdy tanks of extruded aluminium.
In standard design COM Coolers are deliveredwith brackets for mounting to a wall or in aframe.
The turbulator, which controls the oil flow sothat the maximum heat transfer is obtained,
is designed for low oil pressure drop without
the formation of a heat-insulating boundarylayer in the oil tube.Air fins are available in louvred and non-louvred options. The choice is decided by the actualoperating conditions and working environment. E- and F-fins are newly developed.
Within a max. matrix width of 650 mm and a variable height up to 450 mm the COM cooler isavailable in many standard dimensions. E-typeF-type 3