| | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | 500 Series | | |
| | | |
| | | F-Type Housing | | |
| | | |
| | | (GJM20 MOUNTING BOLTS ON 0 585 B.C. | | |
| | | 1380 | | |
| | | |
| | | |
| | | B-Type Housing | | |
| | | |
| | | 'S) M20 MOUNTING 30LTS AS SHOWN | | |
| | | |
| | | 100A HSK rJose is standard, ISO 50 Milling Nose h optional. | | |
| | | |
| | | | | | | | | | | | | | | | Spindle Type | From ■Bearing* immj | ; Rear Bearings (mm) | Speed (grease) (mux. RPM) | Speed (air/oil): (max. RKM) | Continuous power S3 ikW) | Peak Powej .'-Sö(kW) | Freq. Max. "(Hertz) | | | | 500JS22G____ | 150 | ion | 2,500 | 4.000 | 22.0 | 24,0 | 133 | | | | 5.00 S40R | im | 100 | 2,500 | 1.1)00 | 40.0 | 5l.fi | 200 | | | | 50O_S63A____ | 150 | 100 | 2,500 | 4.000 | 63.0 | sau | 267 | | | | | | | | | | | | | | | |
| | | |
| | | | | | | | | | SPINDLE TECHNICAL DATA | | | | Maximum Shaft Inertia (kg nr) | 2.270 | | | | Maximum Spindle Weight (kg) | 1,300 | | | | Static Axial Stiffness (N/jim) | 395 | | | | Static Radial Stiffness at Nose (N'/jim) | 6K\ | | | | | | | | | | | | | | | | DRAW BAR TECHNICAL DATA | | | | Dniw Bai Retention Force (N) | 28.000 | | | | Oil Volume Mas. (cc) | 45 | | | | min Unclampins Pressure (bar) max | 40 | | | | L6G | | | | | | | | | |
| | | |
| | | 8 Power Draw Bar retention farce and unclamp pressure for optional ISO milling taper noses can vary with RPM. Consult our application engineers to discuss your application and special needs. | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | |