| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | 320 Series F-Type Housing | | |
| | | |
| | | 0.52G | | |
| | | £ | | |
| | | |
| | | I | | |
| | | 3-L | | |
| | | |
| | | | | | | | | | | | | | i .^J-.'lp'j! | | T; | | ij \, | . : | | | | SII | --_ | | _ | | r ; | | | | | | | | | | | | | |
| | | |
| | | |
| | | zur—1 | | |
| | | |
| | | |
| | | (6) M14 MOUNTING BOLTS ON 9 370 B.C. | | |
| | | |
| | | 5- Type Housing | | |
| | | |
| | | (6) M14 MOUNTING BOLTS AS- SHOWN | | |
| | | |
| | | 80A HSK Mose fs standard, ISO 50 Milllng Mose is optional. | | |
| | | |
| | | | | | | | | | | | | | | | | | Spindie Type | | Front . Bearings inir.1 ) | t | Rear t earing s. (mir.) | .Speed (grease) (max. RPM) | Speed! V'o i r/nil\ | Continuous | Peak Power SG | Freq. Max. Uteri?.} | | | | | | c | (, dll/OIJ^ (max. RPM) | power SI (kW) | | | | 320_S23A___ | 90 | 75 | 8,000 | 12.000 | 23.5 | 28.0 | 800 | | | | 320_S23S____ | | 90 | 15 | 8,000 | 12,000 | 23,6 | 26.0 | 600 | | | | 320_S33R____ | | 90 | 75 | 8,000 | 12.000 | 33.0 | 42.5 | 400 | | | | | | | | | | | | | | | | | |
| | | |
| | | | | | | | | | si»im>lk'["I-:<:ijnk:ai. data | | | | | | | | | Maximum Shaft Incrda (kg m2) | .180 | | | | Maximum Spindle Weight (kg) | 575 | | | | Static Axial Stiffness (N/um) | 230 | | | | Static Radial Stiffness at Nose (N/um) | 350 | | | | | | | | | |
| | | | | | | | | | DRAW BAR TECHNICAL DATA-" | | | | Draw Bar Retention Force (N) | ftitfi | | | | Oil Volume Max. (cc) | 45 | | | | min Undamping Pressure (bar) max | 40 | | | | 160 | | | | | | | | | |
| | | |
| | | |
| | | 1 4 Power Draw Bar retention force and unclamp pressure for optional ISO milling taper noses can vary with RPM. Consult our application engineers to discuss your application and special needs. | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |