C017 Cartridge Spindle Plain Car tridg e P ositioning Nut Car tridg e

Shown with Collet Nose Shown with .500" Arbor Nose Straight Bore Nose

7.884.88SET SCREW FLAT2.622.12REF..12 SQ. KEY1.25.47.88.50.751.51.34.81 FLATSERICKSON COLLET NUT ASSEMBLY1" HEX. FOR 200DA SERIES COLLET COLLET RANGE 1/16 TO 3/8 DIA (COLLET NOT INCLUDED) 8.904.881.38 3/32 x 3/64KEYWAY.25 WIDE x .06DP. KEYWAY.50 x 20 RH.FLANGEDHEX NUT11/16 HEX. 1.751.10.82 .19MAX .50 TYP 3.38
MIN 3.88
MAX ø.37 ø2.44 TYP ø1.50 1.25.12 SQ. KEY.47
ø.5000 .4995 ø1.8745 1.8740 .88FLATS ø.5000 .4995

Collet Capacity: 1/8 to 3/8" Diameter.

ø1.8745 1.8740ø.500.499

Mounting:.500" Diameter.

Clamp-Style Brac ket

1/4-20 SOC.SET SCREWSET SCREWFLAT.12 SQ.KEY8.121.25.474.881.121.25.50.50
ø.22ø.5000 .4995 ø1.00ø1.8745 1.8740ø.5005 .5000 3.250.75 ø 11/32 – THRU ø 1/2 C'BORE – .31 DP. 4 HOLES

P ositioning Nut Brac ket

3.250.38 ø 11/32 – THRUø 1/2 C'BORE – .34 DP.4 HOLES 1.75 1.81.375/.3762.004.00 4.751/4-20 SOC.SET SCREW (3) .69TYP. ø1.875
2.500 3.13.69 3.250.38
.56 1.75 1.81.375/.3762.004.00 3.63
.14TYP. 2.19 .375/.376 .69TYP. ø1.875
3.131.500.69

Sentry 017 Specifications

SpeedTorque Power/Revolution Spindle Nose Options Front Bearing Configuration Rear Bearing Configuration Static Axial Stiffness Static Radial Stiffness Industrial seal Type Lubrication Motor Drive Package Weight

.14 TYP. 1.63 .375/.376

C017 Spindleshown with positioning nut cartridge and positioning nutbracket

(Approx.)

Spindle Cartridge Cartridge and BracketWarranty 34,000 rpm Maximum35 in-lb 1/1800 hp/rev Arbor, Straight Bore, and Collet (1/8" to 3/8") Duplex Class 7, "DB" 17 x 35 mm Ball Single Class 7, 17 x 35 mm Ball 140,000 lb/in 40,600 lb/in Labyrinth seal System Permanent Grease Pack Not Available4.0 lb7.5 lb 1 year

7