| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | ccessories À | | |
| | | Series | | |
| | | |
| | | |
| | | SQUARE 360° SWIVEL (Model Code: SS) | | |
| | | |
| | | Top Plate | | |
| | | |
| | | The optional Square Swivel attachment is available >rovide 360° rotation of your slide assembly. The top plate rotates on a hardened center pivot while four | | |
| | | |
| | | T | i-uuus iiuc in 11 ic uiiuuicji i-siui \uu Locking nuts, easily accessed from four sides, hold the
| | |
| | | |
| | | |
| | | Square Swivel in the angular position
| | your application | | |
| | | |
| | | requires. The swivel is equipped with a circular scale that is calibrated in degree increments. | | |
| | | |
| | | Holes for mounting the swivel are machined in the base. The load capacity of the swivel is equal to the comparable size dovetail | | |
| | | Center Pivot Plug T-Bolts | | |
| | | Locking | | Nuts | | |
| | | |
| | | |
| | | |
| | | slide. See chart below. Note: Consult factory when mounting Square Swivel in any position other than horizontal. | | |
| | | |
| | | Note: Swivel top and bottom are ground flat and parallel. | | |
| | | Mounting | | Holes | | |
| | | |
| | | |
| | | |
| | | |
| | | (4) HOLES FOR E SHCS | | |
| | | |
| | | | | | | | | | | | , 1 | —-zu—— | ,11 | | | | — | | | ■ T | | | | -1 | | — « | | | | | | | | | | | |
| | | |
| | | | | |
| | | |
| | | 0-90-0-90-0 SCALE | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | DIMENSIONS IN INCHES | | | Weight (Lb.) | | | | TYPE | CD | E | H-1 | K | P | R | S | S-2 | Y | Z | ZU | | | | SS4 | 0.38 | 5/16 | 2.31 | 3.250 | 0.69 | 0.75 | 4.00 | 2.00 | 0.88 | 0.31 | 2.00 | 8.0 | | | | SS6 | 0.62 | 3/8 | 2.50 | 4.750 | 0.69 | 0.81 | 6.00 | 3.00 | 1.00 | 0.25 | 2.25 | 18.0 | | | | SS8 | 0.62 | 1/2 | 3.00 | 6.750 | 0.88 | 1.06 | 8.00 | 4.00 | 1.12 | 0.38 | 2.88 | 40.0 | | | | SS10 | 0.75 | 1/2 | 3.00 | 8.500 | 0.88 | 1.06 | 10.00 | 5.00 | 1.12 | 0.38 | 3.25 | 65.0 | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | 44 | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |