Catalogues - thermal-analysis-from-ambient-to-1600-c

Catalogue Thermal Analysis from ambient to 1600°C

www.setaram.com

Page

/ 4

Contact the
Manufacturer

Where to buy
this product ?

Request
a Quote

/ 4

See other catalogues for Setaram

Text version of the page

SENSOR RODS

Different sensor rods are available for DSC/DTA, TGA, simultaneous TGA-DSC/DTA measurements:

• DTA rods: Platinel (ambient to 1 200 °C) or Platinum-Rhodium (ambient to 1 600 °C available with 20, 100 or 160 ul crucibles made of aluminum, alumina or platinum

• DSC rods: chromel-constantan (ambient to 800 °C) or Platinum-Rhodium (ambient to 1 600 °C - plate type DSC, available with 75, 100 or 110 ul crucibles made of aluminum, alumina or platinum

• TGA rod: ambient to 1 600 °C, available with 400 or 500 ul made of alumina, platinum.

DSC plate rod

DTA rod

TGA rod

3D HIGH SENSITIVITY Cp SENSOR®

To increase the sensitivity of Cp measurement it is necessary to increase the mass, the sensitivity of the sensor and the speed of the industrial furnace. Thanks to the large size of the crucible (380 ul to be compared to less than 100 ul for a regular DSC), the sensitivity of the sensor (up to 0.5 uV/mW) and the high heating and cooling rate of the furnace (100 °C/min) it is possible to have Cp measurements within 2 % precision, on the whole temperature range (ambient -

1 600 °C) .

The 3D Cp (Calvet type sensor® is composed of10 suppliers of thermocouples in series, that totally surround the sample.

To FTIR

3D Cp Sensor®

EVOLVED GAS ANALYSIS

LABSYS evo offers a "Plug & play" gas analyser coupling device, enabling simultaneous MS and FTIR connections. The coupling device is heated up to 300 °C to avoid any gas condensation and is complete ly insulated for a safe handling.