Servomech

1.1SERVOMECH LINEAR ACTUATORS

SERVOMECH linear actuators are electromechanical cylinders able to transform a rotary movementinto a linear motion.Developed and manufactured for industrial applications, Servomech linear actuators can offer higherlinear speeds and loads at up to 100% duty cycle, even in the most extreme conditions and arduous applications.Able to work under push or pull load.According to their features they can be:- Statically self-locking: able to sustain static load keeping the same position when the motor isswitched off.- Statically non self-locking: the load can be sustained with a brake motor manufacturer.They are capable of maintaining constant speed with a varying load, at a very low noise level.Their motion can be simply a push-pull “ON-OFF” action, also they can become servomechanismsworking as controlled axes, by means of accessories such as encoders or potentiometers for thepositioning control, motors with tacho-generator and industrial servo drives.Their installation is simple and not expensive: it requires just a front and rear hinging as for standardhydraulic and pneumatic cylinders.They can perfectly replace pneumatic or industrial hydraulic cylinders being able to perform:- Accuracy in push-pull motion- Accuracy in stopping position - Position holding under load (self-locking) - Energy consumption only while moving- High safety in lifting a load (internal safety devices available)- Use in hard environment - Use in low temperature environment without freezing problems - Use in high temperature environment without fire riskSERVOMECH linear actuators have a wide application field.They are intended for industrial applications where it is necessary to perform in total safety or to controla linear motion while moving, turning over or lifting a load.The wide range of sizes, stroke lengths, linear speeds, motors and accessories makes it easy to adaptthese products for new applications or replace even complicated mechanical solutions and hydraulic orpneumatic cylinders, improving the applications final performances.

1.2 SERVOMECH LINEAR ACTUATORS RANGE

SERVOMECH’s linear actuator range consists of 2 main product groups determined by their differentinput drives:- Worm gear drive with electric motor at 90° with respect to the actuator axis - Timing belt manufacturer drive with electric motor in parallel with respect to the actuator axisBoth groups are available with either of the leadscrews below:- 1 or 2 starts trapezoidal acme screw- Ball screw