Manual Knee Mill - SERVO - #1

Text version of the page

Specifications subject to change without notice. 01/12/06 © 2006 Servo Products Company SERVO MANUAL KNEE MILLS MILL SPECIFICATIONS SV 50 SPC SV 54 SPC Table 10" x 50" 12" x 54" 3 T-Slots 5/8" on 2-1/2" centers 5/8" on 2-1/2" centers Travel Table travel 32" 33-1/2" Cross travel with cover Cross without way cover 15" 16" 15-5/8" 17" Knee travel 16" 16" Quill travel 5” 5” Ram 17-3/4" 17-3/4" Spindle nose to table 2" to 18" 3-1/2" to 19-5/8" Throat depth (min/max) 4-1/2" to 24" 4-1/2" to 24" Ways – table to cross Dovetail Dovetail Ways – cross to knee Dovetail Square Ways – knee to column Dovetail Square Spindle Taper R8 (NST 30 optional) NST 40 Motor 3 hp, 220 VAC 3 phase, 60 Hz 5 hp, 220 VAC 3 phase, 60 Hz Variable frequency Inverter drive 50-625 rpm back gear 500-5000 rpm direct 50-625 rpm back gear 500-5000 rpm direct Quill feeds .0015, .003, .006 .0015, .003, .006 Quill diameter 3-3/8" 4-1/8" Spindle runout max .0002" .0002" Head tilt left to right 90° 90° Head tilt front to back 45° 45° Dimensions Floor area W x D 72" x 60" 80" x 65" Height 81" 87" Weight 2,750 lbs. approx. 3,630 lbs. approx. Table load (max) 770 lbs. 1,200 lbs. STANDARD MILL FEATURES • Prewired electrical box integrating E-stop for all functions • Precision ground 1 ¼” dia. ball screws (X & Y axis) • Angular contact bearings (X & Y axis) • Hardened and ground quill with hard chrome plating • Quill return spring made in USA • Hardened and ground precision back gear • Hardened and ground ways, column and knee • Rulon® on table and cross ways • Inverter head drive for low maintenance • Automatic way lubrication system with alarm • Matched pair of Fafnir ABEC7 angular contact spindle bearings • Wipers (4) under table and retractable rear way cover • High tensile Meehanite cast iron • Halogen lamp (110 volt) • Fan mounted in head for additional cooling • Chip tray OPTIONS • Servo Type 140 Power Feed for knee (SV 50 SPC) • Servo Type 150 Power Feeds for table and cross • Power drawbar • Flood coolant • Servo Turbo Drive for knee (SV 50 SPC or SV 54 SPC) • 2-axis or 3-axis DRO from Acu-Rite, Anilam, Newall, or Sony • Riser blocks - 4", 6", 8" SV 50 SPC TOOLING PACKAGE #1 • 15 Piece R8 collet set 1/8”-1” x1/16”, 52 Piece clamping kit & 6” Precision milling vise SV 50 SPC TOOLING PACKAGE #2 • Tooling package #1+ Servo Type 140 Power Feed for knee & 2-axis DRO (Acu-rite Micro-Line, Anilam 211 or Newall C70) SV 50 SPC TOOLING PACKAGE #3 • Tooling package #1 + Servo Type 140 Power Feed for knee & 3-axis DRO (Acu-rite Micro-Line, Anilam 211 or Newall C70) SV 54 SPC TOOLING PACKAGE #1 • 52 Piece clamping kit & 6” Precision milling vise SV 54 SPC TOOLING PACKAGE #2 • Tooling package #1+ Servo Turbo Drive Knee Feed & 2-axis DRO (Acu-rite Micro-Line, Anilam 211, Newall C70, or Sony Millman) SV 54 SPC TOOLING PACKAGE #3 • Tooling package #1+ Servo Turbo Drive Knee Feed & 3-axis DRO (Acu-rite Micro-Line, Anilam 211, Newall C70, or Sony Millman) Another quality product from "America's Power Feed Manufacturer" SERVO PRODUCTS COMPANY CALIFORNIA BRANCH 14254 Valley Blvd., Unit A City of Industry, CA 91746 Ph. 626.961.7800 Fax 626.961.2444 HEADQUARTERS 34940 Lakeland Blvd. Eastlake, OH 44095 Ph. 440.942.9999 Fax 440.942-9100 FLORIDA BRANCH 8950 131st Ave. N. Largo, FL 33773 Ph. 727.585.8555 Fax 727.585.6555 SV 50 SPC (Shown with power feeds mounted on X & Y axis)