Ball-screw Ø 40 mm
ut. sec
30
Tool changer time
1.6
(114 option) (tool to tool)
creased through the use of ceramic spheres alternated with steel spheres and combined with the absence of friction between those.
Auto-lubricated roller-pads
The roller-pads and the
ball screws are ‘long-life’ lubricated and installed on both sides of the pad. The tool change is equipped with the cams in bathing oil which allow for countless changing cycles.
Upon request, tool storage of 60 tools is available.
The performance and life of the ball-screw are significantly in-
CHIP REMOVAL
The chips are evacuated through 10 slides inside the machine base and collected in the
swarf conveyor which drives the re-sidual out of the machine. This guarantees the maximum removal of the chips and cleanness without need for external in-tervention. The chips are evacuated through a scraper
suppliers of conveyor which is ideal for short steel, cast iron and alloys chips that are produced during the machining processes.
8