Catalog excerpts
SENTRY ISOLOK MSD SAMPLER Point Samplers Solid & Powder Steam & Water The Sentry® ISOLOK® MSD automatic point sampler is designed for sampling high-viscosity products such as toothpaste, peanut butter, tomato paste, juice concentrates – even rocket propellant – at pressures above 30 PSIG. The ISOLOK MSD sampler delivers a fixed volume of sample with each cycle. MODELS ISOLOK MSD BENEFITS The ISOLOK MSD sampler delivers a fixed volume of sample with each cycle. The sampler mounts onto the process line using a two-inch tri-clamp ferrule mount held with a clamp and gasket. All product-contact seals are FDA-recognized elastomer compounds selected to meet application conditions. Compressed air drives the plunger into the process, where the process line pressure opens the annulus. The plunger retracts, holding the sample in the annulus. Once fully retracted, the annulus collapses, ejecting the sample into the container. The operator is isolated from the process at all times by the sampler’s seal design, and the sample captured in the container is locked out from external influences to provide a truly representative sample. FEATURES Samples high-viscosity materials using a contracting annulus that ejects each collected sample into the attached container Collects sample volume of 14 cc at 30 to 200 psig (2.07 to 13.79 barg) process pressure Ideal for liquids or slurries up to 150,000 centipoise Options include port closures, line adapters, different container types, sampler enclosures (with or without heater), sample heating or refrigeration, optional materials of construction a
Open the catalog to page 1SENTRY ISOLOK MSD SAMPLER > POINT SAMPLERS > AUTOMATIC SAMPLING maximum cycle frequency 6 strokes per minute, depending on application line mounting options tri-clamp materials 316 stainless steel/Buna-N; other seal materials available sample temperature range -40° to 500°F (-40° to 260°C), depending on seal material and duty cycle ambient operating temperature range -5° to 131°F (-20° to 55°C) depending on seal material compressed air requirement 2 SCFM at 90 psi (.05 rrrVmin at 6.2 bar) 966 Blue Ribbon Circle North, Oconomowoc, Wl 53066 U.S.A. | +1-262-567-7256 | sales@sentry-equip.com...
Open the catalog to page 2All Sentry Equipment catalogs and technical brochures
-
SENTRY ISOLOK SAA SAMPLER
2 Pages
-
SENTRY SA SAMPLER
2 Pages
-
SENTRY B1 SAMPLER
2 Pages
-
SENTRY SINGLE LINE
2 Pages
-
SENTRY VREL CONTROL VALVE
2 Pages
-
SENTRY SBC CONTROLLER
2 Pages
-
SENTRY ISOLOK MSA SAMPLE
2 Pages
-
Sample Coolers
8 Pages
-
Sample Sequencer 5
2 Pages
-
DCCP Reboiler
2 Pages
-
Corrosion Product Sampler
2 Pages
-
Resin Column (RC 100)
2 Pages
-
Resin Column (RC 200/400)
2 Pages
-
Thermal Shut Off Valve (TSV)
2 Pages
-
AutoVREL
2 Pages
-
VREL
2 Pages
-
TCU Air Cooled
2 Pages
-
Manifold Valve
2 Pages
-
Sentry Sample Coolers
8 Pages
-
Sentry Automatic Samplers
8 Pages
-
API Sampling Suite
4 Pages
-
Sample Chiller
2 Pages
-
Sample Cooler TLR
2 Pages
-
Blowdown XC
2 Pages
-
Dual Tube Coil Sanitary
2 Pages
-
Dual Tube Coil (DTC-8)
2 Pages
-
Dual Tube Coil (DTC-4)
2 Pages
-
Dual Tube Coil (DTC-6)
2 Pages
-
Spiral Heat Exchanger
2 Pages
-
SampleCooler USC
2 Pages
-
Sample Cooler WSW
2 Pages
-
Sample Cooler TRB
2 Pages
-
Sample Cooler FXR
2 Pages
-
Sample Cooler FLR
2 Pages
-
Model MSE ISOLOK®
2 Pages
-
Sentry MT-1 Magnetic Trap
2 Pages
-
Sentry MT-2 Magnetic Trap
2 Pages
-
Sentry MT-5 Magnetic Trap
2 Pages
-
Sentry AutoVREL Spec Sheet
2 Pages
Archived catalogs
-
Manifold Valve
2 Pages
-
TCU Water-Cooled
2 Pages
-
TCU Air-Cooled
2 Pages
-
VREL®
2 Pages
-
AutoVREL
2 Pages
-
Twist-Lock Cell Holder (TLC)
2 Pages
-
Thermal Shut-off Valve (TSV)
2 Pages
-
Resin Column RC200/RC400
2 Pages
-
Resin Column RC100
2 Pages
-
Corrosion Products Sampler
2 Pages
-
Sample Sequencer® 5
2 Pages
-
Sample Coolers
8 Pages
-
Power Generation Solutions
6 Pages
-
Spiral Tube / Tube-in-Tube
8 Pages
-
Model RPG Data Sheet 18.1.4
2 Pages
-
Model MCL Sampler IOM
1 Pages