Like all connections, ISOLOK Professional samplers must be initially installed and periodically inspected to insure all connectors supplier, clamps and fasteners are frmly tightened. Failure to keep fasteners or connectors properly secured could result in leakage or damage. In addition: 7.1 -Follow your plant safety procedures whenever maintenance or inspection is required on this sampler. 7.2-Do not weld, machine or otherwise modify the sampler or control in any manner. Consult the Factory before considering any changes to the sampler. 7.3-Before control is operating, or whenever samples are to be taken, make sure sample collection bottles or containers are mounted and personnel are clear of any hazard. 7.4-Keep control enclosure tightly closed at all times (except for maintenance or inspection) to protect electrical equipment. 7.5-Your sampler is a ruggedly-built precision instrument that will give years of reliable service Establish an inspection schedule and replace or maintain seals or other parts when wear or leakage first appears. 7.6-Never use pipe wrenches, vise-grip pliers, or other marking or abrasive material on your |