Catalog excerpts
Automatic & Manual Samplers For Liquids, Slurries & Gases Isolok® • Low-E • Controllers More Than 85 Years of Sampling Experience
Open the catalog to page 1automatic isolok® samplers Automatic samplers allow batch or composite sampling. • 3 cc to 8 cc sample volume per cycle • Process pressure: vacuum to 200 psig (14 barg) • 10 cc to 25 cc sample volume per cycle • Process pressure: vacuum to 300 psig (21 barg) Model SAL-Q • 10 cc or 25 cc sample volume per cycle • Delta Knife Gate Valve enables sampler removal while process remains in service • Process pressure: 300 psig (20.7 barg) to 400 psig (27.5 barg) Model SAL-B • Up to 25 cc sample volume per cycle • ISOVALVE® allows sampler to be easily removed for inspection or servicing while...
Open the catalog to page 2manual LOW-Emissions samplers Manual samplers that ensure maximum safety to the operator and the environment. • Double block valve gives built-in speed loop capability • Adjustable throttling stop and spring return for safety • One piece process and vent needle assembly is replaceable without sampler disassembly • Non-coring side discharge needles allow complete resealing of the septum when the bottle is withdrawn from the sampler • Wide variety of bottle, septum and needle/tube stub arrangements and sizes Model MCL (liquids) and MCG (gases) • Continuous flow of sample assures...
Open the catalog to page 3manual LOW-EMISSIONS SAMPLERS Manual samplers that ensure maximum safety to the operator and the environment (continued from page 3) • Contemporary samples without a speed loop or bypass • Eliminates sample waste by back purging old sample from sample line • Sampler and sample line are purged in each sample cycle, ensuring a representative sample Controllers Model SBC Automatic Sampler Controller • Dedicated logic control system capable of controlling any automatic sampler in the Sentry product line • Features both Local and Remote operating modes • Operator-friendly user interface •...
Open the catalog to page 4All Sentry Equipment catalogs and technical brochures
-
SENTRY ISOLOK SAA SAMPLER
2 Pages
-
SENTRY SA SAMPLER
2 Pages
-
SENTRY B1 SAMPLER
2 Pages
-
SENTRY SINGLE LINE
2 Pages
-
SENTRY VREL CONTROL VALVE
2 Pages
-
SENTRY SBC CONTROLLER
2 Pages
-
SENTRY ISOLOK MSA SAMPLE
2 Pages
-
Sample Coolers
8 Pages
-
Sample Sequencer 5
2 Pages
-
DCCP Reboiler
2 Pages
-
Corrosion Product Sampler
2 Pages
-
Resin Column (RC 100)
2 Pages
-
Resin Column (RC 200/400)
2 Pages
-
Thermal Shut Off Valve (TSV)
2 Pages
-
AutoVREL
2 Pages
-
VREL
2 Pages
-
TCU Air Cooled
2 Pages
-
Manifold Valve
2 Pages
-
Sentry Sample Coolers
8 Pages
-
Sentry Automatic Samplers
8 Pages
-
API Sampling Suite
4 Pages
-
Sample Chiller
2 Pages
-
Sample Cooler TLR
2 Pages
-
Blowdown XC
2 Pages
-
Dual Tube Coil Sanitary
2 Pages
-
Dual Tube Coil (DTC-8)
2 Pages
-
Dual Tube Coil (DTC-4)
2 Pages
-
Dual Tube Coil (DTC-6)
2 Pages
-
Spiral Heat Exchanger
2 Pages
-
SampleCooler USC
2 Pages
-
Sample Cooler WSW
2 Pages
-
Sample Cooler TRB
2 Pages
-
Sample Cooler FXR
2 Pages
-
Sample Cooler FLR
2 Pages
-
Model MSE ISOLOK®
2 Pages
-
Model MSD ISOLOK®
2 Pages
-
Sentry MT-1 Magnetic Trap
2 Pages
-
Sentry MT-2 Magnetic Trap
2 Pages
-
Sentry MT-5 Magnetic Trap
2 Pages
-
Sentry AutoVREL Spec Sheet
2 Pages
Archived catalogs
-
Manifold Valve
2 Pages
-
TCU Water-Cooled
2 Pages
-
TCU Air-Cooled
2 Pages
-
VREL®
2 Pages
-
AutoVREL
2 Pages
-
Twist-Lock Cell Holder (TLC)
2 Pages
-
Thermal Shut-off Valve (TSV)
2 Pages
-
Resin Column RC200/RC400
2 Pages
-
Resin Column RC100
2 Pages
-
Corrosion Products Sampler
2 Pages
-
Sample Sequencer® 5
2 Pages
-
Sample Coolers
8 Pages
-
Power Generation Solutions
6 Pages
-
Spiral Tube / Tube-in-Tube
8 Pages
-
Model RPG Data Sheet 18.1.4
2 Pages
-
Model MCL Sampler IOM
1 Pages