1. Active Digital Output Sensors: (Hall Effect) Input voltage: +4.5 to 24 VDC or 5.5 to 36 VDC Output current (I industrial sink): 20 to 50mA Max Output Signal: Digital (square Wave) 0 to input voltage or 0 to 5V. Target: Ferrous material, single tooth or slot up to 48 pitch Gear tooth or magnet as a target. Airgap: .005" to .120" (.127mm to 3.046mm) Frequency: 0 to 15KHZ (for speed sensor) Operating temperature range: -40° F to 302° F (-40°C to 150°C) (Hall Effect) Input voltage: 4.5 to 6 VDC or 5.5 to 36VDC. Output voltage at 0 Gauss: 2.5V TYP Linearity: ± 3% full scale Sensitivity: 1.30 mV/G Bandwidth: 23KHZ TYP Airgap: .005" to 0.750" (.127mm to 19.036mm) Operating temperature range: -40°F to 255°F (-40°C to 125°C) 3. Passive Analog Output Speed sensors: (VR) Resistance: 40 to 2000 Ohms Target: Ferrous material, single tooth to 32 P/ Gear AirGap: 0.005" to 0.150" (.127mm to 3.808mm) Speed range: 30 to 1000 Inch/sec Output voltage (P-P): .100 to 200 Vpp Operating temperature range: -40 °F to 302 °F (-40°C to 150°C) Optional modifications: 1.Input voltage transient protection 2.Severe environment and Automotive Protection 3.EMI / EMC protection |