SENSOR TECHNOLOGY

Strain gauge In-Line Torque transducer [SIT]

General Description

The E100 SIT (Strain Gauge In-Line) Transducer isruggedised for industrial applications with a synthetic rubber boot to protect the transducer from abnormal shocks. An In-line cable connector is fitted for safety and quick disconnection. The transducer is ideal for measurement of reaction torque from 0.1Nm to 5000 Nm. Transducers can be used with customers own strain gauge amplifier system, or with our E101/2 Transducer Display interface.

Standard and Mechanical Specifications

Model Full Scale Deflection A (square) B C D E100SIT (Calibration in any of the units below is possible) across flat S.I. units F.P.S units M.K.S units (in.) (mm) (mm) (mm) E100SIT-1 0-1 Nm 0-10 lbf.in 0-10 kgf.cm 0.250 64 56 32 E100SIT-2 0-2 Nm 0-20 lbf.in 0-20 kgf.cm 0.250 64 56 32 E100SIT-3 0-5 Nm 0-50 lbf.in 0-50 kgf.cm 0.250 64 56 32 E100SIT-4 0-10 Nm 0-100 lbf.in 0-100 kgf.cm 0.375 67 56 32 E100SIT-5 0-20 Nm 0-200 lbf.in 0-200 kgf.cm 0.375 67 56 32 E100SIT-6 0-50 Nm 0-500 lbf.in 0-500 kgf.cm 0.500 70 56 32 E100SIT-7 0-100 Nm 0-100 lbf.ft 0-10 kgf.m 0.500 106 90 52 E100SIT-8 0-200 Nm 0-200 lbf.ft 0-20 kgf.m 0.750 112 90 52 E100SIT-9 0-500 Nm 0-500 lbf.ft 0-50 kgf.m 0.750 112 90 52 E100SIT-10 0-1000 Nm 0-1000 lbf.ft 0-100 kgf.m 1.000 108 76 89 E100SIT-11 0-2000 Nm 0-2000 lbf.ft 0-200 kgf.m 1.500 138 93 102 E100SIT-12 0-5000 Nm 0-5000 lbf.ft 0-500 kgf.m 1.500 138 93 102 Cable length 2 metres Outputs See E101/2 data sheets Power supply From E101/2 module (±5V) Accuracy ± 0.5% FSD; ±0.1% to order Linearity ± 0.5%; ±0.1% to order Temperature range -10ºC to +50ºC Temperature Less than 0.05% per ºC. coefficient Hysteresis Better than 0.1% Safe 400% of rating mechanical overload Memory Embedded non-volatile memory chip contains calibration data
Data parameters measured at 20ºCSensor Technology Ltd reserves the right to change specification and dimensions without notice.TSE2039R