LUMI Series Luminescence Sensors - Sensor Instruments - #1

/ 4


catalogue search
LUMI Series Luminescence Sensors - Sensor Instruments
P. 01
LUMI Series Luminescence Sensors - Sensor Instruments
P. 02
LUMI Series Luminescence Sensors - Sensor Instruments
P. 03
LUMI Series Luminescence Sensors - Sensor Instruments
P. 04
Pages:
LUMI Series Luminescence Sensors - Sensor Instruments


See other catalogues for Sensor Instruments

Text version of the page
LUMI Series • Luminescence Sensors Product Information info@sensorinstruments.de • www.sensorinstruments.de (2004-09-24) LUMI Series / Page 1 of 4 Sensor Instruments GmbH • D-94169 Thurmansbang • Schlinding 11 Tel. +49 (0)8544 9719-0 • Fax +49 (0)8544 9719-13 LUMI Series Luminescence Sensors Luminescence sensors are applied where adhesives, sealing compounds, special liquids, or other materials are combined with fluorescent substances. When illuminated with UV-light, these fluorescent additives will light up and emit light in the visible spectrum (e.g. red, orange, yellow, green, blue). In the LUMI Series sensors, modulated UV light is employed to suppress outside light sensitivity. The special optical arrangement of optical emitter and receiver (radial or linear emitter) allows operating distances of up to 100 mm. The sensors are equipped with an RS232 interface, the Windows® software is included in the delivery. Characteristics Parameterization under Windows® with software LR-Scope V2.3 The sensors can easily be set with the help of a Windows® user interface in which the sensor signals are displayed in numerical and graphical form; the user interface also provides various software algorithms and setting parameters. Parameters such as e.g. - Threshold (sensitivity) - Switching hysteresis - Laser power mode (static or dynamic) - Averaging - Polarity can be set with the software. Functional principle of the sensor In the LUMI Series luminescence sensors, modulated UV light is directed onto the object to be inspected. If there are fluorescent color particles on the object surface, the UV light, depending on the type of color particle, is converted into a color in the visible wavelength range. Different color filters can be used here to respond to the respective color range. The output of the sensor provides an analog signal that informs about the intensity of the fluorescent color. Furthermore, a switching signal is provided at the sensor connector. The UV transmission power can be adjusted by means of an integrated potentiometer.

pageCatalog pdf di En 2012-05-22-31