| | | FMS 18 The photoelectric sensor FMS 18-4 U covers small to medium switching distances and ranges. Due to its high switching frequency of 1 kHz, the sensor is particularly suitable for reliable, non-contact measurement of fast processes. It is even possible to invert the output signal on this small device due to a plug-in bridge circuit on the front end. The sensor is also equipped with two separate P and N switching outputs | | FMS 30 The photoelectric sensor FMS 30-4 U covers the entire range from small to very large switching distances and ranges. A switch on the front of the device makes it possible to reduce the switching distance by half. This facilitates precise adjustment of the switching point in close-up range and improves detection of small parts. A second switch on the front of the sensor inverts the output signal. The sensor thus prepares the logical, correct signal, as N.O. or N.C., according to the type of application. Each device is also equipped with two separate P and N switching outputs. | | Product advantages (depending on fibre optic used) (depending on fibre optic used) Robust metal housing Exclusive switch output Reversible N.O/N.C. Different sheathings for glass fibres Fibre optics for temperatures up to I60°C Analogue output 0...I0 V/0...20 mA (FAV 30) Cross-section converter adaptable (recommended for FAV 30) | | |
| | | Sn und Sn/2 reversibility N.O/N.C. function is set via the sliding switch on the front end. Switch position "Sn/2" reduces the scanning distance by 50% and thus enables better detection of small parts. | | Uncomplicated connection of sensor/fibre optics The glass fibre optics can be fitted to FMS sensors (in this case FMS 30) by means of a simple screw connection. | | |