Catalogues - plantscan-8-ch-vibration-temperature-monitor

Catalogue Plantscan 8 ch. Vibration/Temperature Monitor

www.sensonics.co.uk

Page

/ 1

Where to buy
this product ?

SENSONICS - 42733, 16432, 208355, 4919, 4773, 40724

/ 1

See other catalogues for SENSONICS

Text version of the page

P/âfltSCâflMu\ï\channe\ Vibration & Temperature monitor

Protect rotating machinery from mechanical breakdown and reduce maintenance costs with this easy to use, effective condition monitor

and

^/c/e/7cy

Digital display scans through measurement channels and can be switched to show alarm levels

High Visibility LED's and alarm relays provide early warning of plant failure

Rugged, steel, lockable enclosure, sealed to IP66 with viewing window

All 8 transducer signals available for data collection and analysis

Cable entry gland plate

♦ Low cost, highly effective industrial monitoring system.

♦ Up to 8 channels of Vibration or Temperature monitoring.

♦ Provides effective round the clock protection for rotating machines from mechanical breakdown.

♦ Transducer signals available on BNC for data collection/analysis, manually switched through each channel.

♦ Backlit LCD digital display.

♦ Adjustable scaling for vibration & temperature ranges.

♦ Continuous individual analogue outputs for each channel, (current or voltage).

♦ Selectable vibration monitoring mode, acceleration or velocity.

♦ Factory set band pass filter frequencies, (12 dB/octave).

♦ True RMS conversion for effective monitoring.

♦ Two individually adjustable level alarms for each channel, with manually switched display of set level.

♦ Transducer integrity fail alarm and channel defeat facility.

♦ Local or remote reset facility.

MC9601

c«iMti s 4ft

mmi 14ft

Setting up the plantscan is quick and easy to do

Each monitored channel is scanned for approximately 5 seconds. A green channel identification LED illuminates to indicate which reading is currently displayed, when an alarm situation occurs this LED will become amber or red in colour depending on the level of alarm reached. The larger alarm LED situated directly beneath the display will illuminate continuously whenever an alarm condition is present on any channel. The transducer integrity alarms are shown by a green LED. Dynamic signals can be collected for analysis/trending purposes via the BNC connector on the display panel and selecting the desired channel on the rotary switch.

< SENSONICS LTD

Tel: 01442 876833, Fax: 01442 876477.