| The DR series of LVDTs are designed for heavy industrial environments where a quick and easy to install displacement transducer is required. The DR LVDT consists of a stainless steel body enclosing the transducer windings and signal conditioning. The voltage input and output is via a connector, cable or conduit depending on the application and environment. If moisture is a problem then a connector or cable version only gives limited protection whilst the conduit version enables the transducer to be fully submersed. The SR series transducer can be supplied in a spring loaded format with either end exit or side exit or supplied with rod end (universal) bearings. If temperatures are likely to exceed 90°C or zero and gain controls are required then a Sensonics AC input AC output transducer should be used. |