Hydrogen Sampler
AP33
Results in seconds Results in seconds High sensitivity Single measurements are straightforward.Simply press a button and the Hydrogen Sampler
draws a gas sample. The results are presentedwithin seconds on the detectors display. Outputdata (date, time and hydrogen concentration) can
be fed to a printer or a computer. When fed to aWindows PC the data can be plotted real-time inour Excelbased software. High selectivity Automatic monitoring Automatic sampling Automatic calibration Simple and rapid PC and printer output The Hydrogen Sampler AP33 is very simple tocommission and operate. Warm-up time is onlyone minute. The sample can be drawn by
pressing a button or automatically byprogrammable settings. Calibration is done bypressing a button and is completed within
seconds. The simplicity and speed is fenomenal
compared to
gas chromatography (GC). Thanksto its small size and robustness the unit caneasily be transported and installed in different
locations. Compact and robust Unique selectivity The new Hydrogen Sampler AP33 from Sensistor
Technologies is the quickest and simplest way ofanalysing low concentrations of hydrogen gas.Combined with the
Hydrogen detector H2000 the
unit has a unique selectivity to hydrogen andgives an accurate number within a few seconds,independent of the presence of hydro-carbons
and water vapour. H
2 S does however affect thesensor and needs to be removed with a H
2 S filterconnected to the sample input (optional).