I/O ANALOGUE MODULES
A PI AI TC
(user configurable) input channels. (user configurable) input channels. Single (user configurable) input channel Voltage
Thermocouples 2 to 10 Vdc full scale. , , , S, T, E B & N Uniersal Inut module // RS Analogue I / O module PI control // RS Analogue Inut module // RS Termocoule Inut module // RS Thermocouples Current, 20 mA bipolar Voltage 80 mV max. , , , S, T, E B & N esolution 1 in 16,000 (bipolar) for current and voltage (15 bit). O >
RR C >
O -DA -PID -AI -TC TDs SIAS Ni100 & PT100, 3/ wires I >
PUTS Single (user configurable) input channel. esistance Input Impedance: To 15 Ohms Max 100 Ohm for current Thermocouples Current 20 mA max. 100 Ohm for Voltage. , , , S, T, E B & N. Voltage 10 V max.
Overload protection TDs esolution: 0.1C for thermocouples and TDs, 1 in 10,000 for resistance, 1 in 10,000 (bipolar) for current and voltage to 60 V continuous (max) Ni100 & PT100, 3/ wires Input Impedance esistance 10 M Ohm To 15 Ohms Max Input Impedance: Overload Current 20 mA max. 2.5 Ohm for current Protected to 60 V max Voltage 10 V max. 1 M Ohm for Voltage. Isolated Thermocouples required (Negative connec-
tions are commoned). Input Impedance: esolution: 0.1C for thermocouples and TDs, 10,000 parts for resis-
tance, 10,000 bipolar points for current and volt-
age Overload Protection 2.5 Ohm for current to 60 V continuous (max) 1 M Ohm for Voltage. Overload Protection to 60 V continuous (max) O >
UTPUTS Single analogue output 0/ to 20 mA for
Pid control. esolution better than 1 in 3,200 COMMUICATIO I >
TRAC 2 wire S85 2 wire S85 2 wire S85 2 wire S85 P >
ROTOCO ModBUS TU Slave ModBUS TU Slave ModBUS TU Slave ModBUS TU Slave For Parameter setting (Filter time, input type, scaling, serial inter-face and address). S >
P 800 to 5600 bps 800 to 5600 bps 800 to 5600 bps 800 to 5600 bps For Parameter setting C >
OMMSISTACMA 1,200 m 1,200 m 1,200 m 1,200 m (Filter time, input type, scaling, serial interface and address). S >
AMPI TIM 300 ms 300 ms 200 / 00 ms 20 / 50 ms For Parameter setting C >
OMMUICATIO TIM 20 ms 38,00 Baud 20 ms 38,00 Baud 20 ms 38,00 Baud 20 ms 38,00 Baud (Filter time, input type, scaling, PID settings serial interface and address). S >
OTAR For Parameter setting (Filter time, input type, scaling, serial interface and address). RA ATA P >
OR S >
UPP 19 to 0 Vdc (9 to.30 opt.) 19 to 0 Vdc (9 to.30 opt.) 19 to 0 Vdc (9 to.30 opt.) 19 to 0 Vdc (9 to.30 opt.) 19 to 28 Vac, 50-60 H 19 to 28 Vac, 50-60 H 19 to 28 Vac, 50-60 H 19 to 28 Vac, 50-60 H P >
OR COSUMPTIO 2.5 W 2.5 W 2.5 W 2.5 W >
AAIC I >
SOATIO 1,500 Vac 1,500 Vac 1,500 Vac 1,500 Vac T >
RASUCR POR SUPP 20 mA 18 V min 20 mA 18 V min 0 mA 18 V min none >
ROT P >
A Power On Power On Power On Power On I >
ICATIO Failure / Error Failure / Error Failure / Error Failure / Error Transmit Data (Tx) Transmit Data (Tx) Transmit Data (Tx) Transmit Data (Tx) eceive Data (x) eceive Data (x) eceive Data (x) eceive Data (x) O >
PRATI T >
MP 0 to 55 C 0 to 55 C 0 to 55 C 0 to 55 C S >
TORA -20 to 0 C -20 to 0 C -20 to 0 C -20 to 0 C M >
A UMIIT 90 0 C non condensing 90 0 C non condensing 90 0 C non condensing 90 0 C non condensing P >
ROTCTIO IP20 IP20 IP20 IP20 C >
OCTIOS Screw clamp, plug in connectors, 2.5 mm >
2 max Screw clamp, plug in connectors, 2.5 mm >
2 max Screw clamp, plug in connectors, 2.5 mm >
2 max Screw clamp, plug in connectors, 2.5 mm EN 50081-2, EN 55011, EN 50082-2, EN 61000-2-
2/, EN 5010/11 >
2 max M >
OUTI 35mm symmetrical DIN rail 35mm symmetrical DIN rail 35mm symmetrical DIN rail 35mm symmetrical DIN rail EN 50081-2, EN 55011, EN 50082-2, EN 61000-2-
2/, EN 5010/11 >
IMSIOS 1.5 x 100 x 112 mm 1.5 x 100 x 112 mm 1.5 x 100 x 112 mm 1.5 x 100 x 112 mm >
OT SAPPI yes yes yes yes EN 50081-2, EN 55011, EN 50082-2, EN 61000-2-
2/, EN 5010/11 >
IT 200 g 200 g 200 g 200 g S >
TAARS EN 50081-2, EN 55011, EN 50082-2, EN 61000-2-
2/, EN 5010/11 >