UNI-FOAM Aluminium/Polyester - Selig - #1

Text version of the page

Uni-FoamTM Expanded Polyethylene Uni-Foam EPE 42 FACED WITH ALUMINIUM FOIL/ POLYESTER FILM ON BOTH SIDES DESCRIPTION Extruded closed cell foam produced from low density Polyethylene faced with Aluminium foil/Polyester Film on both sides AVAILABILITY Calipers: Available from 1.00mm to 2.00mm (Please enquire for further details) PROPERTIES General l Clean, dust-free l Does not absorb moisture l Does not support mould growth Dimensionally stable - unaffected by changes in humidity and temperature under normal storage conditions l l Excellent chemical resistances to acids, bases and alcohols Specific Caliper Tolerances ±0.15mm Density of EPE 42 Core 0.42 g/cc Nominal ±0.03 g/cc Uni-Foam EPE FACING DESCRIPTION - Aluminium Foil/Polyester Film - 23 micron Polyester film/adhesive/12 micron Aluminium foil/adhesive/23 gsm PE. CONFORMANCE TO FOOD REGULATIONS RAW MATERIALS No other raw materials are used other than those permitted under the following national regulations: USA FDA 1520 or are GRAS (Generally Recognized as Safe) under FDA Regulations). Uni-Foam EPE 42 also conforms to FDA 21CFR177.1210 for closure sealing gaskets. file:///D|/2000/CLIENTS/UNIPAC/2002/pdf/p_unifoam_alum_polyester.html (1 of 2) [17/04/2002 2:07:25 AM]