QUADRASEAL EPE based 1.6 mm - Selig - #1

Text version of the page

Technical Information QUADRASEAL FOAM BASED (FACED POLYPROPYLENE) QUADRASEAL 1. Description Uni-Foam® EPE 25 faced both sides Polypropylene film/polyolefin film/9 micron laquered aluminium foil/glassine membrane. Tolerances: Thickness: 1.60mm +/-0.15 mm Tape Width: +/-0.80 mm Diameter: +/-0.15 mm (refers to pre-cut liners) 2. Components and their Conformance to Food Regulations A. Base Material: Nominal:- Polypropylene film Polymer 20 gsm Uni-Foam® EPE 25 Caliper -1.45 mm;Density 0.25 gm/cc: Shore Hardness 75 Polymer 20 gsm Polypropylene film Both Polypropylene films and polymers comply fully with FDA 21CFR 177.1520 for Direct Contact with Food, the EEC Commission Directives 90/128EEC (1990) and 92/39/EEC (1992), Section A, UK 1992 No 3145 (The Plastics Materials and Articles in Contact with Food Regulations) and with the BGA Empfehlungen III. l - Uni-Foam® EPE 25 meets FDA Regulation 21CFR 177.1210 for Closure Sealing Gaskets. B. Polyolefin Film which also provides secondary seal Meets FDA 21CFR 177.1520 for direct contact with food, the EEC Commission Directives 90/128EEC (1990) and 92/39/EEC (1992), Section A, UK 1992 No 3145 (The Plastics Materials and Articles in Contact with Food Regulations) and with the BGA Empfehlungen III. l C. Foil/Glassine Membrane: Nominal:- file:///D|/2000/CLIENTS/UNIPAC/2002/pdf/p_tech_fbquad_1_6.html (1 of 2) [17/04/2002 2:00:21 AM]