SECOMAK have been producing specialist equipment for the provision of hot air for industrial processes for over sixty years and as a result have developed a unique range of heaters for use with their own blowers or independently.To assist with the selection of the correct heater for given temperature and airvolume requirements, SECOMAK have reproduced here the specially prepared Heat Transfer Curves used by their own engineers.When used in conjunction with individual product data sheets, it will enable the specifier to choose the most suitable combination of size, loading and air volume potential applicable to the application. Suitable fans together with accessories for the connection and control of SECOMAK heaters are available on request.When using Heat Transfer Curves due allowance should be made for losses which will depend on the distance from the heater outlet and degree of insulation. > Secomak Ltd. 330 Centennial Park, Elstree, Hertfordshire, WD6 3TJ, UKPhone: +44 (0) 208 7321 300 Fax: +44 (0) 208 7321 301 E-mail: [email protected]: www.secomak.com size="-1">