NetLogCom
8Pages

Catalog excerpts

Data Logger NetLogCom Reliable data storage and transferral • • • • • • • • • • • Comfortable and convenient operation with membrane keyboard and function keypad. 3,5“ TFT-Colour display with graphics of time series and hydrographs. (Graph and list formats). Large storage capacity and data security. Integrated 4G Modem Voice messaging, VoiP (Option). Voice messaging and push operation via different networks Ethernet-interface. Analogue and digital input channels for connection of external sensors. Intelligent alarm-management system. Compact and aesthetic plastic housing. Both network adapters can be used simultaneously (routing). C25_NetLog

Open the catalog to page 1

Description The NetLogCom has been specially developed and tailored to meet the stringent requirements of the waterway and water management administrations, as set out in Annex E of “Waterlevel legislation”. Thanks to the powerful NXP i. MX6 processor, functions and data access on the NetLogCom run separately and can thus be processed in parallel. This also affects the processing on all interfaces. The station manager is equipped with a TFT colour display, keyboard, voice prompter, 4G modem, TCP / IP interface for connecting a DSL router, numerous digital, analogue and serial inputs, a...

Open the catalog to page 2

Data logger Measurement management DCF77 (Option) Software configuration for NetLogCom All settings and configurations related to specific measurement sites can alternatively be carried out by notebook or tablet PC using the supplied „Configuration“ software (Windows): Parameterization of sensors Alarm configuration Measurement data input

Open the catalog to page 3

Redundency concept For the realisation of a redundancy system in the water industry at HND levels (A-level), there are numerous options: 1) 1 logger, 1 and/or 2 transmission paths, 2 sensors (water level) Configuration: 1 x NetLogCom via fixed network (TCP / IP), and/or via mobile network (4G modem), 1 x water level sensor (e.g. SEBA PS-Light-2) to RS 485 input, 1 x water level (e.g. SEBAPuls) 4-20 mA analogue input; Measurement station mobile communications GPRS/EDGE/ UMTS/HSDPA/ HSDPA+/LTE fixed network Meteosat, wo ne t r k Irridium, V-Sat simultaneously possible 2) 2 Logger, 2...

Open the catalog to page 4

Redundency concept 3) 2 Logger, 2 transmission paths, 2 sensors (water level), (crossed configuration) Configuration: 1 x NetLogCom via fixed network (TCP / IP), 1 x NetLogCom via mobile network (4G modem), 1 x water level sensor (e.g. SEBA PS-Light-2) to RS 485 input NetLogCom1 + 2, 1 x Water-level (e.g. SEBAPuls) 4-20 mA-Analogue input to NetLogCom 1 + 2; Measurement station mobile communications Push GPRS/EDGE/ UMTS/HSDPA/ HSDPA+/LTE fixed network Meteosat, wo ne t r k Irridium, V-Sat 4) 2 Logger, 2 transmission paths, 2 sensors (hydrological, meteorological or agro-meteorological...

Open the catalog to page 5

Toolkit Additional analogue and digital inputs and outputs: With the help of external Bus Terminals (WAGO), the NetLogCom can be extended at any time. A bus coupler with Ethernet connection and corresponding input and output terminals are required for connection. The bus coupler communicates via a TCP / IP connection. The data are transferred to the station manager via the Modbus protocol. extension clamps Status of the operating voltage - system - power contacts - data contacts Digital input Digital output Analogue input Analogue output supply 24 V 0V supply via power contacs 24 V...

Open the catalog to page 6

Alarm management The alarm function in the NetLogCom runs as a separate process and checks various conditions, which can then lead to the triggering of an alarm and its forwarding to a specified target. There are numerous parameters which can be entered, for example that of checking a certain value’s limit. An “alarm chain” must first of all be configured. In order to do so, the alarm channel is first used to determine which parameters are to be checked. Then, within the alarm group, the destination of the alarm must be selected, as well as via which transmission mechanism the alarm is to...

Open the catalog to page 7

Technical data Logger: Storage capacity: Storage interval: Channels: Measurement routines: Communications interface: Operation: Input: 4G Modem: Supported networks: Frequencies: Antenna: Communications: Alarm: Current supply: Operating temperature: Triceps 4: XScale, 32-Bit-ARM-v5TE-Processor Triceps 7: NXP i. MX6 ARM Cortex A9 RTC-IC-real-time clock 2 GB SD FlashCard for about. 50 Million data measurements from 10 seconds upwards max. 100 Single value, mid-value, daily minimum-/-maximum, Deltamode 2 x RS 232, 2 x RS 485, Ethernet (TCP/IP), SDI-12, USB, 3G Modem/ 4G (Option), optionally...

Open the catalog to page 8

NetLogCom 8Pages

Catalog excerpts

All Seba Hydrometrie GmbH & Co. KG catalogs and technical brochures

NetLogCom
8Pages