Electrical test equipment for the manufacturing and hire industries
12Pages

{{requestButtons}}

Catalog excerpts

Electrical test equipment for the manufacturing and hire industries - 1

Electrical test equipment

Open the catalog to page 1
Electrical test equipment for the manufacturing and hire industries - 2

World Leading Electrical Test Solutions For over 70 years, manufacturers of electrical products have relied on Clare test equipment to ensure that their electrical products comply with the required performance and safety standards. Now manufactured under the Seaward brand, the Clare range is used on production lines and in test laboratories all over the world to safely and effectively verify the safety and performance of millions of electrical products every day. Seaward products are backed up with a reputation for reliability and expertise. Serving a long list of organisations across the...

Open the catalog to page 2
Electrical test equipment for the manufacturing and hire industries - 3

Test Equipment For The Manufacturing Industry Versatile range of production line testers Advanced integration options The flagship product in the HAL series, the HAL 104 is designed to dramatically improve the efficiency and productivity of production line testing and features: n Analogue inputs allow testing to be recorded on the HAL from external devices e.g. recording the speed of a motor whilst in operation n Digital outputs enable control of external devices using relay control e.g. switching matrices n Compatibility with PowerSmart and SwitchSmart for advanced automation Earth/Ground...

Open the catalog to page 3
Electrical test equipment for the manufacturing and hire industries - 4

Test Equipment For The Manufacturing Industry Sentinel Series Cost effective dielectric strength testers u Technical Specification Earth/Ground Bond Test – Sentinel 501 Only DC Dielectric Strength Test – Sentinel 200, 500, 501 Test Voltage Frequency Programmable Voltage Range Settable Output Current Range Display Range Selectable Range of Pass/Fail Levels Power Requirement Insulation Resistance Test – Sentinel 501 Only Operating Voltage DC Output Voltage Display Range Mechanical Specification AC Dielectric Strength Test Sentinel 200, 500, 501 Dimensions (HxWxL) Programmable Voltage Range...

Open the catalog to page 4
Electrical test equipment for the manufacturing and hire industries - 5

Test Equipment For The Manufacturing Industry STM/L Bench-mounted manual production line safety tester u Technical Specification Earth/Ground Bond Test Test Voltage Frequency Output Current Range Display Range Substitute Leakage (Short to Case Test) 6V AC Nominal As Supply (50Hz or 60Hz) 25A / 10A / 4A / 100mA 0.04Ω – 20Ω Test Voltage Display Range Power/Run/Load Test AC Dielectric Strength Test Display Range Voltage Range Display Range IEC Power Cord Test DC Insulation Resistance Test Test Voltage Test Performed Voltage Range Display Range Power Requirement Earth/Ground Leakage (Load...

Open the catalog to page 5
Electrical test equipment for the manufacturing and hire industries - 6

Test Equipment For The Manufacturing Industry System Integration Test Enclosures Analogue earth/ground bond tester The B433R is a simple to use earth/ground bond tester with a 25A test current suited to manufacturing or laboratory environments. This earth/ground bond tester can deliver a test current of 25A through a resistance/impedance of 0.1Ω from a low voltage AC source. It meets the general requirements of the majority of international test standards that relate to earth/ground bonding measurement. n Simple analogue earth/ground bond tester n Easy to use manual test operation n Ideal...

Open the catalog to page 6
Electrical test equipment for the manufacturing and hire industries - 7

System Integration Eight-channel switching matrix Industrial leakage test module Used in conjunction with the HAL 104 or HAL LED tester, the SwitchSmart provides the capability for automatic electrical safety testing between multiple test points or multiple products simultaneously. Allowing for unrivalled speed and efficiency coupled with a high level of safety that the modern production line demands. This modular eight channel switching matrix can be programmed for each switch port to perform all of the test functions of the HAL 104 or HAL LED. The SwitchSmart offers a simple yet...

Open the catalog to page 7
Electrical test equipment for the manufacturing and hire industries - 8

Test Equipment For The Hire & Rental Industries SafeCheck 8 Bench-mounted automatic safety tester u Technical Specification Earth/Ground Bond Test Test Voltage Frequency Output Current Range Display Range Dielectric Strength Test Voltage Range Display Range Output Voltage Display Range Power / Run / Load Tests Measured Load IEC Power Cord Test DC Insulation Resistance Test Test Voltage Test performed Test Voltage Display Range Power Requirement Substitute Leakage (Short to Case Test) Operating Voltage Test Voltage Display Range 40V AC Earth/Ground, Live & Neutral continuity & polarity...

Open the catalog to page 8
Electrical test equipment for the manufacturing and hire industries - 9

Test Equipment For The Hire & Rental Industries The B255 is Travis Perkins’ first choice for effective, easy-to-use testing. “The safety of our staff and customers is our top priority. We work in partnership with Seaward to ensure all branches comply with HAE standards.” Bench-mounted analogue safety tester The B255 is a simple to use manual electrical safety tester. Providing all the tests required to check Class I and Class II tools and equipment, the B255 is ideal for those looking for a simple solution to electrical safety testing where handwritten test records and labels are preferred....

Open the catalog to page 9
Electrical test equipment for the manufacturing and hire industries - 10

Safety e-Base Production line productivity software Safety e-Base Pro has been designed to ensure production line testing is not only fast and simple, but also reliable and fully customisable to meet the unique needs of any given production environment. Used in conjunction with a HAL series safety tester, Safety e-Base Pro delivers supreme productivity, enabling totally customisable test sequences to be set up and operated via a PC from any safe, convenient location, even away from the production line if required. Intuitive user-interface is taken a step further with the ability to provide...

Open the catalog to page 10
Electrical test equipment for the manufacturing and hire industries - 11

Training, Commissioning, Service and Calibration Full product, software and accessory matrix showing compatibility and part numbers Product test feature comparison table Earth Probe (2m length, others available) Earth Probe Earth Clip Lead Hipot probe (Yellow) Hipot Probe Guard Plug Hipot Clip Verification tools Comms Cable Software trial Earth Bond Lead Status Beacon Status Beacon Guard Plug with Switch Status Beacon Barrier Post and Base – Height 90cm – Single unit Fault Simulator Insulated Rubber Matting (8mm deep, tested to 15kV) – Per metre square For more information please go to...

Open the catalog to page 11

All Seaward catalogs and technical brochures

  1. D255

    2 Pages

  2. PV150

    5 Pages

  3. PrimeTest 50

    2 Pages

  4. 00 Series

    2 Pages

  5. Cropico DO4A

    2 Pages

  6. SDR Series

    1 Pages

  7. PR11

    2 Pages

  8. MTS

    2 Pages

  9. HAL Series

    5 Pages

  10. HAL LED

    4 Pages

  11. CR Series

    1 Pages

  12. Apollo 600

    5 Pages

  13. EV100

    4 Pages

  14. Apollo 400

    5 Pages

  15. Power Clamp

    3 Pages

  16. Apollo 500

    20 Pages

  17. ClareHAL

    12 Pages

  18. Clare Product

    28 Pages

Archived catalogs

  1. DM800/DM800R

    1 Pages