THE LITTLEBLUE WONDER GROWS WITH YOUR NEEDS
SDT 170 S: The entry-level version
The ability to add extra sensors means that the SDT170 is future-proof, as it can grow with your requi-
rements. Furthermore, the digital technology on
which it is built can be updated or upgraded.
The SDT 170 S (Standard) is the entry-level point for the 170 platform
and features standard airborne ultrasonic detection with the internal
sensor or with all our external ultrasonic sensors.
It is primarily used for compressed air leak and vacuum leak detection,
verifying the tightness in a car, plane, truck, train, clean rooms, vessels, etc…).
It is a low cost solution for the detection of electrical problems (arcing, corona,
tracking), inspection of steam traps, hydraulic and pneumatic circuits,
cavitating pumps, and general mechanical inspections where trending
and measured data is not critical. All measured signals are displayed on a segmented analogue bar graph.
The versions SDT 170
SS+MM+MD Tunable frequency LCD display on bargraph
SDT 170 S+: The entry-level version with digital display of the measure
Digital LCD display Built-in (internal) ultrasonic sensor
The equipment SDT 170 S+ has the same characteristics as the SDT 170 S,
with moreover the digital display of the measure. This functionality is
essential to quantify the leak rates and so have an accurate review of
the measurements.
Audio output Connect or for charging unit Connector for PC
SDT 170 M: Multifunctional with storing of
Data memorization
ultrasonic and non-ultrasonic measurements
Route possibilities
(3)
The SDT 170 M (Multifunctional-Mechanic applications-Memory) is the
multifunctionalupgrade from the entry level SDT 170 S Standard. It is arobust instrument capable of detecting small or large pressure and vacuum
leaks in high noise environments and trending the condition of rotating
machinery components such as bearings, gears, couplings, motors, reducers,
as well as the conditions of pumps, valves, stream traps, turbines and
detecting of corona discharges, etc…•Digital measurement and readout capabilities•Contact Probe for contact acoustic vibration measurements•1000 measuring points memory storage with 4 time-dated points historyin a rolling FIFO memory for recording measured data (up to 4000
measurementscan be saved)•External non-ultrasonic sensors connector: temperatures, rotation orlinear speeds, flow of air leak (SCFM) and ambient noise (dBA)•Compatible with all our external ultrasonic and non-ultrasonic sensors.
Data transfer
software MPlus (1) Data transfer
software DataManager (1) External sensor connector External ultrasonic sensors possibility (2) External non-ultrasonic sensors possibility (2) (1) Through the connector for PC.(2) Sensors as option.
(3) 128 max.
The packages SDT 170
SS+MM+MD Storage case and foam Unit with battery, rubber protection
SDT 170 M+: Multifunctional with transfer of
and user manualPrecision accessories
memorizeddata towards a PC
(threaded tip, rubber precision cone and
The 170 M+ has the same characteristics as the SDT 170 M, with more-over the possibility to transfer the memorized data towards a PC.•RS232 or USB connection •User-friendly software (Mplus.exe) provided with the equipmentmeasurements•Data can be integrated in an Excel, Word or other file.
2 plastic extensions) Headphones 130 dB, noise isolating Battery charger Shoulder strap Contact probe and needle
SDT 170 MD: Add the power of data management
Center punch MPlus
software (1)
The SDT 170 MD (Multifunctional-Datalogger) is the complete ultrasonicinspection and predictive maintenance trending machine. With all the
features of the SDT 170 M+ Multifunctional with data transfer, we've
added a customizable data logger: the DataManager software.
This software is the bridge between your SDT 170 MD Ultrasonic Detector
and your PC. Any and all data measured by the SDT 170 MD can be stored
temporarily in the onboard data logger. DataManager allows this information
to be downloaded via RS232 to a PC. Once inside the PC, DataManager
organizes the measurements into a logical and easily retrievable filing system,
which is built and customized by the individual user.
Customized routes can be created within the DataManager software and
uploaded to the SDT 170 MD (up to 128 routes at a time). 1.000 inde-
pendent storage locations area are available in each route and each
memory location can store up to 4 measurements. Warning and alarm
levels are set for individual assets and data can be presented in list or
graphical form. All results can be exported to an ASCII format.•Create and customize routes (128 routes of 1.000 locations)•DataManager software: upload routes from PC to SDT 170MD anddownload measured data from SDT 170 MD to PC•Organize data into graphical or report formats•Alert when an alarm is exceeded•Trend data and provide historical info on the health of plant machinery.
DataManager
software (2) Cable RS232 (1) Data transfer from the unit to the PC. Delivered on a 3 1/2’’ floppy disk. (2) Delivered on Cd-rom with user manual.
Options and accessories
•External ultrasonic sensors•External non-ultrasonic sensors•Ultrasonic transmitters•Batteries and chargers•Adapted belt•Storage cases (3 models) and folding trolley
Upgrading
•Except the SDT 170 MD, any version can be upgraded to any higher versionand gaining all its possibilities.
