Variable Vane Pump - SCODA - (Version JPG) - PDF Catalogue | Technical Documentation

See other catalogues for SCODA

Vane pump, Hydraulic accumulator, Pump, Heat exchanger, Filter unit

Text version of the page

Table SA082-8/E

Vane pumps type PVL

variable displacement

PVL are variable displacement vane pumps equipped with mechanical compensator ® for outlet pressure and max displacement adjustment ®, ®. These low-noise pumps are available in 3 different size, have flange ports according to ISO 3019/2 and are designed to operate with anti-wear oil according to DIN 51524...535 and fire-resistant fluids with same lubricating characteristics.

Wide variety of displacements: from 6,8

up to 43 cm³/rev.

Max pressure up to 150 bar.

PVL-4

@® rotor with vanes

@® stroke limiter piston and screw for max displacement adjustment

@ (jg) spring and screw for pressure compensator adjustment

|T] MODEL CODE

PVL

/ 50 -

variable displacement vane pump

Design number

Conventional dimension:

Conventional displacement according to ISO 3662

06 (dimension 2)

10 (dimension 2)

16 (dimension 3)

20 (dimension 3)

40 (dimension 4)

Other displacements are available on request

Pressure compensator calibration range: - = 30 - 100 bar 50 = 15-50bar 150 = 80 -150 bar (for PVL - 206 and PVL-210 only)

|~2~| MAIN CHARACTERISTICS


Model		PVL-206	PVL-210	PVL-316	PVL-320	PVL-440
Max displacement	[cm³/rev]	6,8	11	18	22	43
Flow rate at 1450 rpm and 7 bar	[l/min]	9,6	15,4	25,2	31	60
Max operating pressure	[bar]	150	150	100	100	100
Max available torque on first shaft	[Nm]	110	110	197	197	400
Inlet port		G 3/4"	G 3/4"	G1"	G1"	flange 172" SAE 3000
Outlet port		G 3/8"	G 3/8"	G 3/4"	G 3/4"	flange 1" SAE 3000
Drain port		G 1/4"	G 1/4"	G 3/8"	G 3/8"	G 1/2"
Recommended pressure on inlet port	[bar]	-0,2 -+0,5
Max pressure at drain port	[bar]	1
Drain	[l/min]	from 1 to 4 - continuous -
Min/max shaft speed	[rpm]	800/1800
Direction of rotation		Clockwise rotation
Installation position		Any
Loads on the shaft		Radial or axial loads on shaft not allowed
Ambient temperature		from -20°C to +70°C
Fluid		Hydraulic oil as per DIN 51524 .... 535; for other fluids consult our technical office
Recommended viscosity		23-45 mm²/s at 40°C (ISO VG22-46). For cold start-up and "0" pressure max: 400 mm²/s
Fluid contamination class		ISO 19/16, achieved with in line filters at 25 urn and (325 > 75 (recommended)
Fluid temperature		max +70°C

SA082

Variable Vane Pump - SCODA - #1

Vane pump, Hydraulic accumulator, Pump, Heat exchanger, Filter unit