Heat Exchanger - SCODA - (Version JPG) - PDF Catalogue | Technical Documentation

WWW.SCOda.it Table SK140-1/E

Heat exchangers

water-oil

|T] MODEL CODE

X-RE

301

X-RE = Water-oil heat exchanger ( 4 way circuit)

Size :

200 , 301 , 302 , 502

Other sizes are available on request

Design number

Synthetic fluid:

Contact our technical office

|~2~| MODEL CODE

Y-T

60 - CB2

Y-T = Water-oil heat exchanger ( 2 way circuit )

Synthetic fluid:

Contact our technical office

Size :

60-CB2 80-CB2

Design number

|~3~| MAIN CHARACTERISTICS


	Installation position	Horizontal suggested ( clamping on feet).
	Max pressure	Oil : 12 bar Water: 12 bar
	Max working temperature	+99 °C
	Materials	Body : carbon steel Tubes : copper
	Hydraulic connections	Protect the heat exchanger against pressure peaks on exhaust line with a by pass check valve setted at 4 - 5 bar
	Fluid	Hydraulic oil as per DIN 51524...535; for other fluids contact our technical office
	Recommended viscosity	15 + 100 mm²/s at 40°C ( ISO VG 15 +100 )
	Fluid contamination class	ISO 19/16, achieved with in line filters at 25 urn and 1325 > 75 (recommended )

[4] PERFORMANCE


Model	Recommended oil flow	Wasted power @ AT = 35°C
X-RE-200	20 + 70 l/min	3+6 kW
X-RE-301	55 + 125 l/min	9+13 kW
X-RE-302	65 + 155 l/min	12 + 19 kW
X-RE-502	85 + 220 l/min	15 + 25 kW

Y-T60-CB2	5+30 l/min	1,3 + 2,5 kW
Y-T80-CB2	25 + 60 l/min	3 + 4,9 kW

Oll flow Indicated In the table , permit to obtain the best performance. Lower oil flow than minimum reduce the efficency while higher oil flow increase the pressure drop (Ap) whitout efficency improving.

SK140

Heat Exchanger - SCODA - #1

Flow switch, Hydraulic pump, Hydraulic accumulator, Heat exchanger, Filter