Catalogs >
SCHURTER >
PTS

PTS
4Pages

Catalog excerpts

Metal Line Keypads Switch for Public Transport Systems PTS, Actuator symbol: open PTS, Actuator symbol: close - Momentary switch available in version Standard or as custom specific variant Assembly by screws with nuts - Four-conductor cable, optional male tabs on housing - Illumination housing and actuator made of plastic material, cover plate made of aluminium - Variable color design of the bezel and the cover plate, customer specific laser lettering - high lifetime with 10 million actuations Excellent tactile feeling - Illumination for switching status recognition (Viewing angle 180°) - Low mounting depth with angled cable version html-datasheet, General Product Information, CE declaration of conformity, RoHS, CHINA-RoHS, CAD-Drawings, Product News, Detailed request for product Technical Data Electrical Data Supply Voltage Switching Voltage Switching Current Rated Switching Capacity Dielectric Strength Burst Impulse Insulation Resistance Lifetime Mechanical Data Actuating Force Actuating Travel End Stop Strength Vibration Resistance Shock Resistance Tightening Torque Lifetime LED operating data are listed in separate table min. 5 VDC , max. 137 VDC min. 5 mA, max. 250 mA 17 W 8 kV through air, 6 kV across contacts, 500 VAC (VAC 1 min., DIN EN 50155) ± 1,8 kV 1,2/50 µs Surge, ± 2 kV 5/50 µs Burst according to DIN EN 50155 > 100 MΩ > 10 million actuations at Rated Switching Capacity Climatical Data Operating Temperature IP-Protection Other Data Fixing Screws Cable Cross Section Weight Material Illumination Housing Actuator Bezel Symbols Cover of Actuator Gasket -40 to +85 °C IP 67 Front Side, , IP 65 Rear Side 3*M4 4*0.5 mm² appr. 85 g PC PC / ABS PBT PC / ABS Aluminium anodized NBR70 8 ± 4 N center, 10 ± 5 N edge 0.8 ± 0.5 mm center, 1.0 ± 0.5 mm edge 250 N 5 h (category 1 class B) 30/6 g/ms (DIN 60068-2-27) , 3/5 g/ ms (3 vertically and horizontally/ 5 lengthwise, DIN 61373) 0,8 - 1.0 Nm > 10 million actuations Detailed information on product approvals, code requirements, usage instructions and d

Open the catalog to page 1

Metal Line Keypads Dimension PTS version with angled cable Other form of cable outlet on request Ø87 Through hole drilling Through hole drilling Threaded hole drilling Assembly Instructions Assembly Turn the bezel in clockwise direction until it snaps Insert bezel in open area Turn the bezel with disassembly tool 10° counterclockwise Insert disassembly tool Input Systems Threaded hole drilling Hole patt

Open the catalog to page 2

Pull disassembly tool Turn the bezel with disassembly tool again for 15° counterclockwise and remove the bezel Diagrams PTS NO PTS NC (PTS NC version available on request) Input Systems ELECTRONIC COMPONENTS

Open the catalog to page 3

Qualification Test Qualification Test 4 H.SCHURTER Input Systems ELECTRONIC COMPONENTS The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications.

Open the catalog to page 4