Catalogs >
SCHURTER >
New product: UMZ 250

New product: UMZ 250
3Pages

Catalog excerpts

Non resettable fuses www.schurter.com/PG01_2 Surface Mount Fuse with Clip, 11.1 x 4.2 mm, Time-Lag T, UMZ 250 = UMT 250 (Au) + UMC 250 - VDE/UL Approvals UMT 250, UMT 250 (Au), UMC 250 , see variants - High breaking capacity of 200 A @ 250 VAC (IEC) - UL approval for 0.08 A - 4 A 277 VAC and 250 VDC - Primary protection on SMD PCBs - Industrial electronic Packaging Details pdf-datasheet, html-datasheet, General Product Information, Approvals, CE declaration of conformity, RoHS, CHINA-RoHS, e-Shop, SCHURTER-Stock-Check, Distributor-Stock-Check, Detailed request for product Technical Data Rated Voltage Rated current Breaking Capacity Characteristic Mounting Admissible Ambient Air Temp. Climatic Category Material: Housing Material: Terminals Storage Conditions Product Marking 250 VAC, 125 VDC 0.08 - 4 A 200 A Time-Lag T PCB,SMT -40 °C to 85 °C 40/085/21 acc. to IEC 60068-1 Ceramic Gold-Plated Copper Alloy 0 °C to 60 °C, max. 70% r.h. , Current, Dielectric strength, Characteristic, Breaking Capacity Soldering Methods Solderability Resistance to Soldering Heat Life Test Moisture Resistance Test Terminal Strength Mechanical Shock Resistance to Solvents Flammability Reflow 245 °C / 3 sec acc. to IEC 60068-2-58 260 °C / 10 sec acc. to IEC 60068-2-58 MIL-STD-202, Method 108A (1000h @ 0.42*In @ 70°C) MIL-STD-202, Method 106E (50 cycles in a temp./mister chamber) MIL-STD-202, Method 211A Deflection of board 1 mm for 1 minute MIL-STD-202, Method 213B (Shock 50g, half sine wave, 11 ms) Cleaning with common solvents min. UL 94V-1 (acc. to EIA/IS-722, Test 4.12) Soldering pads Pre-Arcing Time Rated Current In 0.08 A - 4.0 A

Open the catalog to page 1

Variants Rated Current [A] Breaking Capacity Order Number Approval Overview UMT 250 -> Fuse with tin-plated caps, Approval Status: VDE, UL LISTED, cURus, Free of CCC, PSE JET, KTL UMT 250 (Au) -> Fuse with gold-plated caps, Approval Status: VDE Mark and cURus UMC 250 -> Clip, Approval Status: VDE UG Mark and cURus UMZ 250 = UMT 250 (Au) + UMC 250 There is no approval existing for the combination fuse and clip UMZ 250, but the fuse and the clip are fully approved independently at VDE/UL. See details above. In the reflow soldering process, the fuse must have gold-plated caps, otherwise fuse...

Open the catalog to page 2

The specifications, descriptions and illustrations indicated in this document are based on Fuses current information. All content is subject to modifications and amendments.

Open the catalog to page 3