SCHMIDT® PneumaticPress
14Pages

Maximum pressing force from 1.6 kN to 60 kN The SCHMIDT ® PneumaticPress range consists of a modular system suitable for transforming, joining and assembling operations optimally within the pressing capacities of 1.6 – 60 kN. With the addition of the SCHMIDT ® PressControl 75 or 600 and the optional process monitoring, these presses become EC type-approved, CE-conformed workstations. Therefore these press systems can be used in either single cycle mode or automatic mode. The application determines the selection of the press system. Consideration is given to the flexible design of the assembly location taking into account the ergonomic and safety aspects. These characteristics are achieved by means of a finely adjusted, modular type product range. The efficiency and increased process reliability of these press systems have been proven many thousands of times, in single applications, semi-automated assembly systems and have been integrated into automated production lines. Safety Concepts see page 72

Example of a system design with a direct acting press Cylinder unit Maintenance-free specially developed for the assembly technology; with flow control for speed regulation of the downstroke. 1 Press Head unit The working height can be rapidly and accurately adjusted due to the height adjustment’s ease of use. Can be used without the frame as processing station in automated installations. 2 Pneumatic control package Two-channel pneumatic package (as shown) is based on a modular valve block, designed to operate with filtered, non­ lubricated air, supply pressure range of 3 – 6 bar. 3 Force...

Functional description considering the example of a 3-chamber pneumatic cylinder In working stroke, three pistons 7 connected by the piston rod 6 are pressurized with compressed air via the air connection 1 and move downward. The air below the pistons exhausts from the cylinder chambers via the depressurized connection 2 and the breather vents 3 and 4 . The ram 5 extends up to the maximum working stroke. In return stroke, the upper cylinder chambers are depressurized via the connection 1 and only the bottom piston is pressurized with compressed air via the air connection 2 . Ambient air...

Direct acting with constant force over the entire stroke Features ound anti-rotational ram R djustable ram position in BDC by means of precision lower A stop (1 division line = 0.05 mm) on scale -slot with locking set screw in fixture mounting plate T Pneumatic cylinder with piston and magnet kit for ram position via cylinder switch. 25 Working area with standard control block with force output preselector Press Type

From 1.6 kN to 12.5 kN Press Type Working stroke Nominal force at 6 bar Throat depth Throat depth frame Additional fixture mounting plate suitable for throat depth frame Ram bore Ram diameter Working height 1) Frame No. 3 Frame No. 2 Frame No. 2-600 Frame No. 2-1000 Weight Flange model Cylinder Flange Width across flats Centering shoulder Press Type Frame Overview Options Additional charge applies 1) Typical values; can vary ± 3 mm due to cast and production tolerances Other available options Nickel plated – cast parts are electroless nickel plated, steel components black oxide finished,...

Direct acting with constant force over the entire stroke Features ound anti-rotational ram R djustable ram position in BDC by means of precision lower A stop (1 division line = 0.05 mm) on scale Height adjustment Fast, accurate setting of the work height. Working area with standard control block with force output preselector Precision lower stop 29-4K Working area with standard control block with force output preselector

From 7 kN to 43 kN Press Type Working stroke Nominal force at 6 bar Throat depth Throat depth frame Additional fixture mounting plate suitable for throat depth frame Ram bore Ram diameter Working height 1) Frame No. 34 Frame No. 301 Frame No. 301-500 Frame No. 29 Frame No. 29-500 Frame No. 29-600 Weight (standard) Flange model Cylinder Flange Width across flats Centering shoulder Ø mm Ø mm mm Ø mm Frame Overview Press Type Special fixture mounting plate with 3 longitudinal slots 29 29 29 Special fixture mounting plate with 3 longitudinal slots Options Additional charge applies Typical...

Pneumatic Toggle Presses with maximum force at the end of stroke Features ross hole with locking screw in the press table for safe fixture C of tool ccurate adjustable ram position via fine adjustment (type 33) A -slot with set screw in fixture mounting plate to secure botT Stroke before expanded position of the toggle [mm] Fine adjustment for press No. 33 with scale 1 division line = 0.02 mm. Flexible stroke adjustment reduces the air consumption for shorter

Nominal force at 6 bar Throat depth Throat depth frame Additional fixture mounting plate suitable for throat depth frame Ram bore External ram dimensions Fine adjustment Working height 1) Frame No. 3 Frame No. 2 Frame No. 2-600 Frame No. 2-1000 Weight Working stroke Frame Overview Press Type Options Series standard with no additional charge 1) Additional charge applies Typical values; can vary ± 3 mm due to cast and production tolerances Other available options ickel plated – cast parts are electroless nickel plated, steel N components black oxide finished, aluminum anodized, precision...

Pneumatic Toggle Presses with maximum force at the end of stroke Features Anti-rotational square ram with fully adjustable, Teflon lined gibs for precise travel, no die set required Exact positioning due to fine adjustment scale (1 division line = 0.05 mm) Fine adjustment Stroke before expanded position of the toggle [mm]

From 28 kN to 60 kN Press Type Working stroke Nominal force at 6 bar Throat depth Throat depth frame Fixture mounting plate suitable for throat depth frame Ram bore External ram dimensions Working height 1) Frame No. 34 Frame No. 301 Frame No. 301 - 500 Frame No. 35 Frame No. 35 - 500 Frame No. 35 - 600 Weight Frame Overview No. 34 No. 301 No. 301 - 500 Special fixture mounting plate with 3 longitudinal slots No. 35 No. 35 - 500 No. 35 - 600 Press Type Special fixture mounting plate with 3 longitudinal slots Options Additional charge applies 1) ypical values; can vary ± 3 mm due to cast and...