Safety sensors AES 2335 Technical data

Standards:IEC/EN 60204-1EN 60947-5-3EN 954-1BG-GS-ET-14 BG-GS-ET-20 Stop category0 Control category:3 Start conditions:automatic or start button Start-up test:no / yes Enclosure:glass-fibre reinforced thermoplastic Mounting:snaps onto standard DIN rail to EN 50022 Termination:screw terminals •Control Category 3 to EN 954-1•Classification PDF-M to EN 60947-5-3 incombination with BNS safety sensors•3 enabling paths •Monitoring of BNS range magnetic safety sensors•NO/NC contact combination can be connected•Cross-wire monitoring•ISD Integral System Diagnostics•Available for various operating voltages•Short-circuits proof additional transistor output•Feedback circuit to monitor external relays•Start function•Connection of input expander possible •Additional contacts by means of output expander Cable section:max. 4 mm
2 (incl. conductor ferrules)Protection class:terminals IP 20 enclosure IP 40 to EN 60529U
e :AES 2335/2336: 24 VDC ±15 %AES 2335.1/2336.1: 110 VAC AES 2335.2/2336.2: 230 VAC AES 2335.3: 24 VAC I
e :0.2 A (DC version) Power consumption:5.8 W Feedback circuit:yes Monitored inputs1 NC / 1 NO Input resistance:approx. 2 k

Ω

to ground Input signal „1“:10 ... 30 VDC Input signal „0“:0 ... 2 VDC Max. cable length:1000 m of 0.75 mm
2 conductor Enabling contacts:3 enabling paths Utilisation category:AC-15, DC-13I
e /U
e :2 A / 250 VAC 2 A / 24 VDC Contact load capacity:max. 250 VAC, max. 3 A (cos

Ï•

= 1) Max. industrial fuse rating:3 A gL/gG D-fuseSignalling output:2 transistor outputs, Y1 + Y2 = max. 100 mA, p-type, short-circuit proof Function display:LED (ISD) EMC rating:conforming to EMC Directive Max. switching frequency:5 Hz Overvoltage category:II to DIN VDE 0110 Degree of pollution:3 to DIN VDE 0110 Resistance to vibration:10 ... 55 Hz / amplitude 0.35 mm, ±15 % Resistance to shock:30 g / 11 ms Ambient temperature:0 °C … + 55 ºC Storage and transport temperature:– 25 °C … + 70 ºC Dimensions:55 x 75 x 110 mmNote:Inductive loads (e.g. contactors, relays, etc.) are to be suppressed by means of a suitable circuit. Approvals

H C D

Ordering details Function table

AES 233

➀�

Additional transistor output: Function / Switching condition: No. Replace Description Y1 Authorized operation, enabling paths closedY2 No authorized operation, enabling paths open

➀

5Without start-up test6With start-up test

�

24 VDC.1110 VAC.2230 VAC .324 VAC

1-122