| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | | | |
| | | |
| | | | | | | | | | | | | BNS 120 1 | 1 Technical data | | Contact variants | | | | | Standards: Design: | IEC 60947-5-3 BG-GS-ET-14 cylindrical | | 1 NO/ 1 NC BK 13---14 BU WH 21 —^-22 BN | | | | | | | | | | | | |
| | | |
| | | Enclosure: glass-fibre reinforced thermoplastic, tightening force A/F 17 max. 90 Ncm | | |
| | | 1 NO/2 NC WH 32- | | |
| | | .14 BU -C BN | | |
| | | |
| | | |
| | | Protection class: Termination: Cable section: Mode of operation: Actuating magnet: Control category: | | IP 67 to EN 60529 Boflex cable 4 x 0.25 mm2 magnetic BP 6, BP 8, BP 10, BP 15 SS, uncoded up to 4 | | |
| | | 2 NC BK 11 —^-12 BU WH 21 —^-22 BN | | |
| | | |
| | | |
| | | to EN 954-1 in combination with a safety monitoring module | | |
| | | |
| | | Classification: | | up to PDF-M
| |
| | | |
| | | to IEC 60947-5-3 in combination with a safety monitoring module | | |
| | | |
| | | Sao: Sar: | | 10 mm (BP 6 / BP 8) 20 mm (BP 10 / BP 15 SS) 22 mm (BP 6 / BP 8) | | |
| | | |
| | | • Long life, no mechanical wear • Protection class IP 67 • Intensitive to transverse misalignment • Intensitive to soiling • Particularly large switching distance • Suitable for food processing industry | | 32 mm (BP 10 / BP 15 SS) Switching conditions indicator: - Max. switching voltage
| | |
| | | |
| | | without LED:
| | 100 VAC/DC | | |
| | | |
| | | Max. switching current without LED: Max. switching capacity without LED: | | |
| | | 250 mA | | |
| | | |
| | | |
| | | -02z: 3 W -11z, -12z: 5 W | | |
| | | |
| | | |
| | | Output: Ue: Ie: Ambient temperature: Storage and transport temperature: Max. switching frequency: Resistance to shock: Resistance to vibration: | | |
| | | - 25 °C ... + 70 °C - 25 °C ... + 70 °C 5 Hz 30 g / 11 ms 10 ... 55 Hz, amplitude 1 mm | | |
| | | |
| | | |
| | | | | | | | | | Approvals | | | | | H ® D | | | | | Ordering details | | | | BNS 120-©z-© | | | | | No. Replace Description | | | | | | | | | | |
| | | Note | | |
| | | |
| | | Contact symbols shown for the closed condition of the guard device. The safety sensor must be mounted in such a way that actuation with another magnet is impossible (concealed mounting according to EN 1088) | | |
| | | |
| | | 1 NO/1 NC 1 NO/2 NC 2 NC Individual contact outlet | | |
| | | 11 12 02 2187 | | |
| | | |
| | | |
| | | Enabling zone | |
| | | |
| | | The actuating industrial magnets are not included in delivery, can be found as of page 1-91. | | |
| | | |
| | | 1-89 | | |
| | | 5CHIT1ER5RL | | |
| | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |