Inductive proximity switches / AC 2-wire IFL M 18 Technical data Contact variants

Standards:IEC/EN 60947-5-2 VDE 0660-208S IFL 5-18-10/01IFL 8-18-10/01
1/3 L1N n :IFL 5-...: 5 mm, embeddableIFL 8-...: 8 mm, non-embeddableSwitching element function:P: normally open contact or normally closed contact (Programmable by repositioning theplug-in jumper at the terminal screws)Switching output:F: 2-wire ACU
2/4 NC NO 1/3 L1N 2/4 b :15 ... 250 VACRated supply frequency:45 ... 65 HzI
NC NO e :500 mAI
m :10 mAI
LEDM16x1,5 r :1 mAU
424 d :approx. 4.5 V (250 V/200 mA)Protection circuit:inductive interference protectionU
Ø16,5M18x1 20 4 106,551,278,6126 imp :4 kVAmbient temperature:– 25 °C … + 70 ºCSwitching frequency f:approx. 10 HzProtection class:IP 67 to EN 60529Protection class:II, X • Metal enclosure• Design M 18 x 1• Wiring compartment • AC 2-wire Material:housing and nuts:nickel plated brassTightening torque for nuts:A/F 24 max. 1800 NcmConnection:Terminal screws for max. 1.5 mm
2 , with cable entry M16 x 1.5Note:Instead of nuts, a mounting clamp can be provided (see accessories). Programmable by reposi-tioning the plug-in jumperat the terminal screws
NC

r SchließerÖffne

IFL M 18 Technical data Contact variants

Standards:IEC/EN 60947-5-2 VDE 0660-208S IFL 10-180-01IFL 10-180-10
BN L1N n :10 mm, non-embeddableSwitching element function:A: normally open contact or B: normally closed contactSwitching output:F: 2-wire ACU
BU NC b :15 ... 250 VACRated supply frequency:45 ... 65 HzI
BN L1N e :500 mAI
BU m :10 mAI
NO r :1 mAU
d :approx. 4.5 V (250 V/200 mA)Protection circuit:inductive interference protectionU
24LED454 imp :4 kVAmbient temperature:– 25 °C … + 70 ºCSwitching frequency f:approx. 10 HzProtection class:IP 67 to EN 60529Protection class:II,
M18x1 79312000 X Material:housing and nuts:thermoplastic (PBTP + PA 12) washer: rubber (perbunan)Tightening torque for nuts:A/F 24 max. 300 NcmConnection:cable H03VV-F 2 x 0.5 mm • Thermoplastic enclosure• Design M 18 x 1• Cable• AC 2-wire
2 , length 2 mNote:Instead of nuts, a mounting clamp can be provided (see accessories).

2-8