Inductive proximity switches / DC 3-wire IFL M 18 Technical data Contact variants

Standards:IEC/EN 60947-5-2 VDE 0660-208S IFL 8-180L-10NIFL 8-180L-10P
BN L+L n :8 mm, non-embeddableSwitching element function:A: normally open contactSwitching output:P: 3-wire DCN: 3-wire DCU
BK BU NO – b :10 ... 30 VDCI
e :200 mAI
BN L+L :approx. 3.5 mA (24 V)U
BK BU d :approx. 1.2 V (200 mA)Protection circuit:wrong polarity, inductive interference, industrial transients and short-circuit protectionAmbient temperature:– 25 °C … + 70 ºCSwitching frequency f:approx. 400 HzProtection class:IP 67 to EN 60529Protection class:II,
NO – 24LED454 M18x1 X Material:housing and nuts: thermoplastic (PBTP + PA 12)washer: rubber (perbunan)Tightening torque for nuts:A/F 24 max. 300 NcmConnection:cable LiYY 3 x 0.34 mm
79312000 • Thermoplastic enclosure• Design M 18 x 1• Cable • DC 3-wire
2 , length 2 mNote:Instead of nuts, a mounting clamp can be provided (see accessories).

IFL M 18 Technical data Contact variants

Standards:IEC/EN 60947-5-2 VDE 0660-208S IFL 8-180L-10STP
1 L+L n :8 mm, non-embeddableSwitching element function:A: normally open contactSwitching output:P: 3-wire DCU
4 3 NO – b :10 ... 30 VDCI
e :200 mAI
:approx. 3.5 mA (24 V)U
d :approx. 1.2 V (200 mA)Protection circuit:wrong polarity, inductive interference, industrial transients and short-circuit protectionAmbient temperature:– 25 °C … + 70 ºCSwitching frequency f:approx. 400 HzProtection class:IP 67 to EN 60529Protection class:II,
5491 LED4124 M18x1 M18x1 X Material:housing and nuts: thermoplastic (PBTP + PA 12)washer: rubber (perbunan)Tightening torque for nuts:A/F 24 max. 300 NcmConnection:Plug-in connector M18 x 1Note:Instead of nuts, a mounting clamp can be provided (see accessories). • Thermoplastic enclosure• Design M 18 x 1• Plug-in connector• DC 3-wire

2-43