Inductive proximity switches / AC 2-wire IFL 135 x 80 x 40 mm Technical data Contact variants

Standards:IEC/EN 60947-5-2 VDE 0660-208S IFL 50-385-10/01
1/3 L1N n :50 mm, non-embeddableSwitching element function:P: normally open contact or normally closed contact (Programmable by repositioning the plug-in jumper at the terminal screws)Switching output:F: 2-wire ACU
2/4 NC NO b :15 ... 250 VACRated supply frequency:45 ... 65 HzI
e :500 mAI
80654015,5160,5LEDM20x1,5 m :10 mAI
r :1 mAU
d :approx. 4.5 V (250 V/200 mA)Protection circuit:inductive interference protection, on request: Short-circuit and overload-proof (ordering suffix -1522) Ie = max. 150 mA, Ud = approx. 7.5 V (150 mA)U
65135 205,340 imp :4 kVAmbient temperature:– 25 °C … + 70 ºCSwitching frequency f:approx. 10 HzProtection class:IP 67 to EN 60529Protection class:II, • Thermoplastic enclosure• Rectangular design 385 (135 x 80 x 40 mm)• Wiring compartment• AC 2-wire• Mounting bracket HW 385-1 to simplify mounting available X Material:housing: thermoplastic (Noryl)Connection:Terminal screws with self-lifting pressure clampsfor max. 2 x 1.5 mm
2 , with cable entries 3 x M20 x 1.5 (break-out) Programmable by reposi-tioning the plug-in jumperat the terminal screws
NC

r SchließerÖffne

2-15