Latching Position switching with Remote Reset ZSM 476 ZSM 476 is a latching position switch that can be reset by an electric pulse of 24 V, 110 V or 230 V (AC/DC) Due to this remote reset it may be used in places which are difficult to access. The switch housing conforms to DIN EN 50047 and is only 30 mm wide. Due to the slim design the switch may be used in narrow spaces such as elevator door leaves. Additionally, an application in humid or dusty surroundings is also possible as the switch is IP67 protected. The rigid plastic housing allows Possible applications Applications in elevators for: • Overspeed governor, particularly suitable for machine room less lifts • Monitoring of inspection doors / hatches • Monitoring of removable industrial fences of lift cars • Monitoring of the emergency unlocking system of shaft doors if the elevator pit or shaft head is of reduced height Suitable for applications, where an intentional reset of the switch is required. Suitable for areas of minimal access e.g. wind generators. for competitive pricing thus making the switch a welcome extension of the ZSM family. The switch may be ordered prewired with standard or custom length cables with a varied choice of actuators specifications. Due to these characteristics the switch is perfectly suited for a wide variety of applications.