| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | AS-Interface Safety at Work | | |
| | | |
| | | ZS 75 AS | | |
| | | Technical data | | |
| | | |
| | | Standards: | | EN 50295 EN 60947-5-1 EN 954-1 cast aluminium, enamelled cast aluminium, enamel finish | | |
| | | |
| | | Enclosure: Cover: | | |
| | | |
| | | |
| | | | | |
| | AS-Interface conne | connector M12 x 1 IP 54, IP 65 for version with push button reset and watertight collar 26.5 ... 31.6 VDC, via AS-Interface, reverse-polarity proof < 50 mA, with indicator lamp < 130 mA Profile S-0.B (with indicator lamp) S-7.B IO-Code 0x0 (with indicator lamp) 0x7 ID-Code 0xB ID-Code 0xE | | |
| | | |
| | | Protection class: | | |
| | | |
| | | AS-Interface operating voltage: | | |
| | | |
| | | operating current: specification: | | |
| | | |
| | | |
| | | Inputs: Contact 1 1 2 2 Outputs: | | |
| | | • Pull-wire Emergency-Stop switch • Integrated AS-Interface interface • AS-Interface LED status display • AS-Interface M12 connector • Metal enclosure • 4 various spring force variants (actuating forces) • Adjustable actuating force • Wire up to 50 m long • Reset by push button or key possible • Protection class IP 65 (with push button and external watertight collar) | | | Status Data bits on D0/D1 = dynamic code transmission
| | |
| | | |
| | | off on off | | D0/D1 = static code "00" D2/D3 = dynamic code transmission D2/D3 = static code "00" | | |
| | | |
| | | A0 Indicator lamp (optional) A1 ... A3: not used | | |
| | | |
| | | |
| | | Parameter bits: Input module add | | P0 ... P3: not used ess: default on address 0, | | |
| | | |
| | | |
| | | programmable via the AS-Interface Master or Hand-held programming device | | |
| | | |
| | | |
| | | Indications: AS-Interface: Enabling status: Mechanical life: Maximum cable length Features: EMC rating: | | |
| | | voltage LED green, communication LED red LED yellow > 1 million operations 50 m wire pull and breakage detection conforming to EMC Directive - 25 °C ... + 60 °C 25 °C ... + 85 °C | | |
| | | |
| | | Approvals H ® D in preparation | | |
| | | Ambient temperature: Storage and transport te | |
| | | | |
| | | |
| | | |
| | | Ordering details | | |
| | | Note | | |
| | | |
| | | |
| | | ZS 75©-AS©-®-® | | |
| | | A separate address jack is not available as an option. The addressing must take place via the cable end or the M12 connector. | | |
| | | | | | | | | | | No. | Replace | Description | | | | | ST1 | Connector | | | | | VD | Push button reset | | | | | WVD | Add. watertight collar | | | | | 120N | For wire length 10 - 20 m | | | | | 195N | For wire length 20 - 30 m | | | | | 295N | For wire length 30 - 40 m | | | | | | Without indicator lamp | | | | | G | With indicator lamp (LED) | | | | | | | | | | |
| | | |
| | | 1 | | 4 | | |
| | | |
| | | 2 | | 3 | | |
| | | |
| | | M12 connector: 1: AS-Interface + 2: spare 3: AS-Interface -4: spare A wide range of accessories is available. For selection, see page 2-9. | | |
| | | |
| | | |
| | | 5-46 | | |
| | | 5CHIT1ER5HL | | |
| | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |