AS-Interface Safety at Work - SCHMERSAL - #5

Text version of the page

5 Less installation time with AS-Interface Safety at Work Easier and quicker with ASInterface SaW: Choose a Safety device – Connect it to the yellow AS-Interface cable – Configure the safety function in the safety monitor. – That’s it. AS-Interface SaW System Features • Up to 31 standard and safety slaves on the AS-Interface system • No Safety PLC necessary • Safety-relevant signals can be allocated into groups and multiple Safety monitors may be connected • Response time is max. 40 ms • Safety-relevant signals can be integrated into plant diagnostics • Certified up to - PL e/category 4 in accordance with EN ISO 13849-1 - SIL 3 in accordance with IEC 61508 • Certified by the TÜV (German Technical Inspectorate) No further settings are required at each of the safety devices, the bulky parallel wire cables between the safety devices in the field and the switching cabinet are reduced and wiring time is decreased. The power supply for all safety sensors is supplied over the single yellow AS-Interface cable. R C S OR Safety guard monitoring Controller E-Stop Command Standard AS-Interface Module Safety monitor AS-i Master Position switch Safety light curtain AS-i Power Two-Hand Control AS-Interface Safety at Work overview ble