AS-Interface Safety at Work - SCHMERSAL - #18

Text version of the page

18 AZ 200 AS 40 220 155,5 5 6,5 32,5 37,7 7,5 3,3 20 ± 1 M12 • Safety switches with separate actuator • With integrated guard detection sensor • Integrated AS-Interface • AS-Interface LED and status display • AS-Interface M12 connector • Sensor technology permits an offset between actuator and switch of ± 5 mm • Intelligent diagnosis • Protection class IP 67 • Suitable for applications: - up to PL e/category 4 to EN ISO 13849-1 - up to SIL 3 to IEC 61508 AZ 200 ST-T-AS Technical data Actuating distances to IEC 60947-5-3: Rated operating distance Sn: 6.5 mm Assured operation distance Sao: 4.0 mm Assured release distance Sar: 30 mm Hysteresis: max. 1.5 mm Repeat accuracy R: 1 million operations Latching force: 30 N Protection class: IP 67 to IEC/EN 60529 Insulation protection class: II, X Overvoltage category: III Degree of pollution: 3 Connection: connector M 12 x 1, four pole, 4 A Electrical data: Operating voltage: 26.5 ... 31.6 VDC, via AS-Interface, reverse-polarity proof Operating current: AS electronics: max. 0.1 A AS-Interface specification: (V 2.1) Profile: S-0.B IO-Code: 0x0 ID-Code: 0xB ID-Code1: 0xF ID-Code2: 0xE Outputs: Data bits D0 ... D3: static code 0 or dynamic code transmission Inputs: none Parameter port: P0: Guard and actuator detected P1: Safety release P2: Static 0 P3: Error Input module address: preset to address 0, can be modified by means of the AS-Interface bus master or the hand programming device Diagnostic display: LED green/red AS-i supply voltage on/ AS-i communication error/ Slave address = 0 LED yellow Authorisation LED red Device error The safety switch and the actuator unit (refer to page 22/23) must be ordered separately. R C S OR AS-Interface Safety at Work Ordering details Note Connecting C Approvals F